65gz950b vs 65c9pla

Broken Hope · 26 Nov 2019 at 10:44

hornetstinger said:
Found the TV has two built in video files 4k hdr what are best settings for her modes?

Cinema is the most accurate out of the box, but some prefer cinema home for brighter rooms.

The TV has separate settings for HDR10 and Dolby Vision.

rodders · 26 Nov 2019 at 22:08

Well 3 days in of panny ownership, watching Netflix and it just crashes, lots of noise and reboots. Standby light flashes green lots.
Hmmmm....... Anyone else had this?
Continued to watch the programme and was OK.

hornetstinger · 26 Nov 2019 at 22:15

Been tweaking settings, I don't like her it's too bright, I have set hdr oled light to 40, I'll try again once I get 4k hdr titles.

Watching in the dark with only bias light with 1080p Blu-ray contrast 75 , oled light 25.

hornetstinger · 26 Nov 2019 at 22:15

rodders said:
Well 3 days in of panny ownership, watching Netflix and it just crashes, lots of noise and reboots. Standby light flashes green lots.
Hmmmm....... Anyone else had this?
Continued to watch the programme and was OK.

Tried latest firmware and updated netflix app?

rodders · 26 Nov 2019 at 22:18

It updated the minute I turned it on. Will double check the app thoug .

hornetstinger · 26 Nov 2019 at 22:22

Maybe do a reset after firmware update?

rodders · 27 Nov 2019 at 08:18

I'll have a play tonight. I'm sure it's only a streaming thing and not a TV fault that will happen on any type of viewing

hornetstinger · 27 Nov 2019 at 11:00

Still trying to find a stand, they're all too high. The new origin S2 has adjustable backplate but even so with the backplate and bracket in lowest postion it's still too high. Plus MDF has warped over 10 years so rather not have the same material (brothers stand has also)

200sols · 27 Nov 2019 at 11:01

hornetstinger said:
Still trying to find a stand, they're all too high. The new origin S2 has adjustable backplate but even so with the backplate and bracket in lowest postion it's still too high

Is wall mounting an option?

hornetstinger · 27 Nov 2019 at 11:02

Nope. TV in front of the window

Broken Hope · 27 Nov 2019 at 14:12

hornetstinger said:
Been tweaking settings, I don't like her it's too bright, I have set hdr oled light to 40, I'll try again once I get 4k hdr titles.

Watching in the dark with only bias light with 1080p Blu-ray contrast 75 , oled light 25.

It’s supposed to be bright, there’s no point having a top of the range OLED then destroying the picture by messing with the settings.

OLED light should be at 100 for HDR/DV.

hornetstinger · 27 Nov 2019 at 14:17

Nah. I ran hdr test video and eyes were going argggh in oled 100.

Found a stand origin S1/S3 the same as mine but smaller backplate. Either buy this or just backplate

hornetstinger · 27 Nov 2019 at 15:31

Just bought origin s3.

hornetstinger · 27 Nov 2019 at 15:38

jpaul said:
per other oled thread , if the panasonic processing is avoiding the macro-blocking/contouring issue on lower bitrate streaming sources (ie netflix etc) seen on LG's that would sell them to me -
https://www.avforums.com/threads/fl...date-lgs-fw-fix-now-available.2204059/page-67

Is dithering and macro blocking a issue on dvd, bd, or uhd disc?

TriedandTested · 27 Nov 2019 at 21:37

Reserved a 65C9PLA for the weekend. £1799.

rodders · 28 Nov 2019 at 21:44

Hmmmm, not sure what's going on with the smoothness of the picture.
Just out the box, the edges of things aren't smooth and seem juddery.
Sky +HD programmes, bbc iplayer UHD seven worlds one planet, Netflix UHD stuff.
Thought this would be a super smooth picture, not liking it currently.

Broken Hope · 29 Nov 2019 at 06:56

Make sure you're in one of the ISF modes for SDR content and either cinema or cinema home for HDR and make sure true motion is switched off.

rodders · 29 Nov 2019 at 10:13

Isf mode?

Broken Hope · 29 Nov 2019 at 10:23

Picture mode, ISF dark or bright room, depending on the environment the TV is in.

rodders · 29 Nov 2019 at 11:22

Ok, I'll have a play later when home