8 Pack Can you help, Tweak settins for my memory / uncore ?

8 Pack said:
It may well be the CPU. Not all Haswell clock well. Infact most dont. Run it where it is stable.
Click to expand...

Managed to get stable in games that is lol and over 2 hours of aida32 bench .....
though my graphics are still flakey, i can play other games but splintercell always dx11 crashes

----------------------

event log:

Faulting application name: Blacklist_DX11_game.exe, version: 0.0.0.0, time stamp: 0x52069460
Faulting module name: atidxx32.dll, version: 8.17.10.514, time stamp: 0x520cc3b9
Exception code: 0xc0000005
Fault offset: 0x00070f17
Faulting process id: 0x1ff8
Faulting application start time: 0x01cea6acfe555ce5
Faulting application path: G:\BLACKLIST\src\SYSTEM\Blacklist_DX11_game.exe
Faulting module path: C:\Windows\system32\atidxx32.dll
Report Id: bd268f32-12a3-11e3-8298-94de806e97f6

----------------------------------

seems graphics card related though i can play other games and no issues, played bf3 tonight for over a hour no issues.
though i gave it a try just for kicks, i enabled splintercell dx9 mode with everything maxed out and the game works :o no lockups or crashes, just when i enabled dx11 mode that it flakes out, could it be the game ? though not heard of anyone else with this kind of crash though i have read about loads of people having blacklist_dx11_game.exe crashes.

-----------------------------------

now did you managed to take a look at the green venom set i bought for settings to try, also i have a spot cool 100 on the memory and there ice cold :D ready to be primed :)
got this new set setup with xmp 2133 with T1 enabled and no errors in memtest86+ so need some settings to test out :D

cheers
 
Hi mate read up on the previous post please, managed to figure out that splintercell blacklist works in dx9 but freezes in dx11, i think the game is buggy as, cause i have been testing all other games i play and they work fine.
--------------------------------
managed for fix other issues i had, now all i need from you if you have no input on the above post, did you manage to test out the venoms on your bench to see what you can get out of them so i can use the settings please.

i managed to get : DRAM try tune the seconds so TWCL is 7 TREF is 7936 and TRFC slowly tune down towards 96. Go try 150,128,114,107 then 96.

your settings to try, i got : twcl i couldnt see that setting in my bios :o closest setting was twl and i set that from 8 to 7 got tref at 8000 and trfc down from default 27x to 19x

problems occur when i set them to any of your settings like they wont boot the system up.

could be bad memory for tweaking, can you test them and give feedback cheers.
and i will test the settings after work tommorow ta.

p.s also the venoms are both in the black slots, not sure if it would make a difference putting them both in the orange slots.
with the settings i have put in above though the aida32 speed tests dont look much different from what they where to begin with even though memtest shows slight speed increase...
 
Last edited:
just waiting on you mate, but posting a image of what i have currently, though i cant seem to get 2 settings lower, as the pc will not bootup but that could be cause of other settings i changed, though i have no idea why they 2 settings wont go lower but when you look at the memory and yourself and tweak it to awesome speeds then you can tell me the settings to use

if you could do a default xmp speeds then tighten them for me that would be sweet aswell as another for higher rated speed with tighter timings,
i have a mix here from the image you can see but i still have work to do with them untill you post that is :D lol

--------------------------------------------------

ut2g.png


as you can see not to bad i think but i cant get the system to boot with DRAM refresh interval or DRAM ref Cycle time reduced
there really high and cause refresh delay on the desktop meaning if i shut something down my icons and stuff on the desktop refresh lol but apart from that everything is awesome

though you will probably have better luck tweaking them for me ;)
btw im using X02 bios on the Giga OC board :)
 
Hi mate been tweaking some more settings, though i really dont know what im doing lol
managed to gain a little more speed though im trying to get the memory refreshing lower but i just cant seem to get the DRAM ref Cycle time down :( pc wont boot when i try lower on that setting.
---------------------------------------

have you had any luck with the set you have so i can check timings and use what is the best you got for higher mhz vs lower mhz with the tightest of timeings :D

here is what i got so far.

----------------------------------

r4po.png
 
When you get back from SanFran mate can you tweak my green venom 2133 memory for max tight and max loose so i can get a rough idea what will boot and what will be stable to test for :D

cheers again bud.
 
Back in the office tomorrow. So I may be able to try then. Work load is crazy at the moment. I will do my best to have at least a basic profile.

You on Bios X2??? This is the best one for tuning on OC board.
 
8 Pack said:
Back in the office tomorrow. So I may be able to try then. Work load is crazy at the moment. I will do my best to have at least a basic profile.

You on Bios X2??? This is the best one for tuning on OC board.
Click to expand...

Yes mate im back on X02 bios as i was having a nightmare on X04 with instability and graphics cards lockups.. lol
 
8 Pack said:
Whats our part code on that RAM you have please then I can try test some.
Click to expand...

Hi mate, Just back from work, i have no idea what the part code is or were to look..
im sure its on the back of the box so im going to read that out lol :

MY-045-AR
8GB x2 DDR3-2133C9 1.65v
AVD3U21330908G-2CIG

there is a serial on the back : 132755-0057
Avexir Core Series - Green Venom.
----------------------------------------------

If any of those are wrong can you point me to the correct area to look for the part number,

cheers again mate for the help.
 
Last edited:
8 Pack said:
I will request this tomorrow and tweak it for ya. 2400 C10 is probably the sweet spot if its good Hynix which I suspect.
Click to expand...

hi mate, yeah this stuff i have does 2400 c10.
but its the tweaking im intrested in :D btw i noticed if i ramp up the DIO and AIO and System agent i can get the TREF down lower than i would have thought ;) though im not sure what the max is on SA/DIO/AIO on this stuff or even what the max voltage i can get on them without burning them as that could also allow higher OC :D

----------------------------------------------

but i will look forward to testing your tightest timings and highest loose timings basically what ever is fastest lol :D i will test what you post up tomorrow after work i should be back around 3:pm if you have gotten around to putting up some settings ect..... not sure what you will post up but if possible you could post up highest mhz tightest timings and lowest mhz tightest timings or highest mhz loose timings to see what ever is fastest, i could neve understand memory timings and what settings actually made them go faster apart from the obvious 1st timings ect :D
 
Oh one other thing mate i never asked this as it just poped into my head, can you test out both slots on the board currently i have my memory is slots 1 and 3 *blackslots* closes to the cpu.
but the 2 *orangeslots* might be faster not sure or overclock higher again unsure though some food for thought :D
 
You must log in or register to reply here.
Back
Top Bottom