Associate
- Joined
- 15 Sep 2018
- Posts
- 2
Hi,
I've recently installed a Samsung 970 EVO M2 500GB NVMe drive into my ASRock Windows 10 DeskMini H110 PC, and have successfully installed the Samsung NVMe controller without any issues.
My previous boot-SSD has been migrated successfully too, and everything boots up as I'd expect, but with two specific issues that I'd prefer to address if possible -
1. When I look in the Device Manager at my 970 EVO, the driver stubbornly stays stuck at a 'Microsoft Driver' (version 10.0.17134.1 - date 21/06/2006). Would I not expect to see a Samsung NVMe driver detailed in the disk properties window, on the driver tab? When I try to carry out any sort of driver update, Windows 10 keeps telling me that I've got the best driver installed.
2. When I install Samsung Magician, to try to use that utility, it installs fine but when I run it the utility hangs at the 'Scanning for Drive Information' stage. I've left it for over 30 minutes, and nothing changes, so I'm stuck as to what I can do to get the utility working. I've re-installed a number of times.
Has anyone please got any experience with Samsung SSD issues similar to the above, and were you able to solve any of the two problems that I'm facing?
I know that performance can be affected if the incorrect SSD configuration is being used by Windows, so given the outlay on my new SSD, I'm keen to ensure that it's set up in the most appropriate way, and the above issues tends to make me think that this might not be the case, so I thought I best check here to see if any of the more experienced people can help on these great forums.
Thanks very much for any help or advice offered.
Edit - I should add that having just checked all three of my SSD driver, (two SATA and one M2 NVMe), they all seem to be using the same 'Microsoft Driver' version 10.0.17134.1 - date 21/06/2006. This feels relevant to the above issue, as I'd expect the NVMe SSD driver to have a different one to the other two SATA ones, but perhaps I'm mistaken?
Kind Regards,
Highlander 123
I've recently installed a Samsung 970 EVO M2 500GB NVMe drive into my ASRock Windows 10 DeskMini H110 PC, and have successfully installed the Samsung NVMe controller without any issues.
My previous boot-SSD has been migrated successfully too, and everything boots up as I'd expect, but with two specific issues that I'd prefer to address if possible -
1. When I look in the Device Manager at my 970 EVO, the driver stubbornly stays stuck at a 'Microsoft Driver' (version 10.0.17134.1 - date 21/06/2006). Would I not expect to see a Samsung NVMe driver detailed in the disk properties window, on the driver tab? When I try to carry out any sort of driver update, Windows 10 keeps telling me that I've got the best driver installed.
2. When I install Samsung Magician, to try to use that utility, it installs fine but when I run it the utility hangs at the 'Scanning for Drive Information' stage. I've left it for over 30 minutes, and nothing changes, so I'm stuck as to what I can do to get the utility working. I've re-installed a number of times.
Has anyone please got any experience with Samsung SSD issues similar to the above, and were you able to solve any of the two problems that I'm facing?
I know that performance can be affected if the incorrect SSD configuration is being used by Windows, so given the outlay on my new SSD, I'm keen to ensure that it's set up in the most appropriate way, and the above issues tends to make me think that this might not be the case, so I thought I best check here to see if any of the more experienced people can help on these great forums.
Thanks very much for any help or advice offered.
Edit - I should add that having just checked all three of my SSD driver, (two SATA and one M2 NVMe), they all seem to be using the same 'Microsoft Driver' version 10.0.17134.1 - date 21/06/2006. This feels relevant to the above issue, as I'd expect the NVMe SSD driver to have a different one to the other two SATA ones, but perhaps I'm mistaken?
Kind Regards,
Highlander 123
Last edited: