ATCS Log.

Soldato
Joined
18 Oct 2002
Posts
2,858
Location
watchin scrubs.
The Coolermaster ATCS 110 has always been one of my favorite cases ever (along with the 201) i regretted the day i sold mine, until i found one on the MM a couple of months ago.

ATCS1101.jpg

ATCS1102.jpg

ATCS1103.jpg


I have slowly been gathering parts to put together, to build an understated watercooling rig.

I have swapped out the original black 80mm fans for some modern one's.

ATCS1105.jpg

ATCS1106.jpg


--->
 
I started with the top rad, just a single 120mm. i cut the hole myself and after a few experiments decided on the XSPC fan gaurd.

ATCS1107.jpg

ATCS1108.jpg

ATCS1109.jpg

ATCS11010.jpg

ATCS11011.jpg
 
Also today i got the side panel back from the laser company.

ATCS11026.jpg

ATCS11029.jpg



The guy i got to cut the logo's cut my 120mm hole to big (he's as gutted as i am) he cut it 157mm, fs. :confused:

Anyho he is sending me a 120mm cut out to fit over the hole, im not sure what to do with it yet, so suggestions welcome.
 
Last edited:
Could you not just a whole lot more away from the large circle and put a window in?

Looking good so far though :)

I have another side panel, the 'official' windowed coolermaster one that you could but at the time.

So im sure you can undersatnd i dont want two windowed panels, i want two different ones ;)
 
I'd tell him to stick it, charging you for something thats wrong.

I work with CNC machinery such as hypertherm plasma cutters and lazer cutters all day long. I'd love to know how he got 157mm from 120mm :p
 
Yep :( ... but said he would do the next job half price.


Interested in doing something similar to this with my 110,whats the cost of those laser cuts mate,would like something cut on the front door ATC like yours,are you able to cut through that thickness (front door) with a laser.

Good job, shame about the side hole but really liking everything else.
 
I'd tell him to stick it, charging you for something thats wrong.

I work with CNC machinery such as hypertherm plasma cutters and lazer cutters all day long. I'd love to know how he got 157mm from 120mm :p

I know, but where would that of got me, its not as if you can pick up another ATCS110 side panel :( dont get me wrong i told him how p%&*£d off i am about it. Everypne makes mistakes, i thought it best to be (mostly) civil and get the guy to make amends.

Interested in doing something similar to this with my 110,whats the cost of those laser cuts mate,would like something cut on the front door ATC like yours,are you able to cut through that thickness (front door) with a laser.

Good job, shame about the side hole but really liking everything else.

Cost was £25.00 + p&p. My email is in trust if you want the detials. (im sure this was a one off mistake) he has laser cut for Coolermaster direct.

Yes it will cut through the thivkness of the 110 front door, its a laser :D

The side hole is going to be ok, im confident i can salvage it ;)
 
ooh ooh


can you take one of the screws out of the front mesh and take a photo of it for me? (the screw)

i removed mine about 4 years ago, and can't find a suitable replacement for them :) (now it just sits there gingerly)


don't use LED fans mate, that'll butcher it, and also, a Thermalright Ultra Extreme will not fit in properly, it'll stick out by about 2mm :p
 
Back
Top Bottom