Blue Screen

BigBoy · 16 Feb 2006 at 20:01

perhaps a Zalmon fanmate would be a better idea then as it wil give you a knob you can use to turn the fan speed up and down when you need to but i cannot see them on the OCUK shop anymore but perhaps im blind

it has been known.

Also with the software your having trouble wiith have you looked thru the documentation to see if all your componants are compatable with it as perhaps it doent like you motherboard. and this is causing the problems.

frost-t · 16 Feb 2006 at 21:25

Also with the software your having trouble wiith have you looked thru the documentation to see if all your componants are compatable with it as perhaps it doent like you motherboard. and this is causing the problems.

It was no problem before and not only have I tried the latest version but went back to the old ver just to make sure it wasn't the new release that was causing the issue.

As for the fanmate, it wont fit cos.....well I own a shuttle so unless I cut a nice whole in the side of the case (a chance to use my dremmel) it aint going in so it really has to be software.....

But I still may cut cos I haven't modded in a while.

AWPC · 16 Feb 2006 at 21:54

frost-t said:
It was no problem before and not only have I tried the latest version but went back to the old ver just to make sure it wasn't the new release that was causing the issue.

As for the fanmate, it wont fit cos.....well I own a shuttle so unless I cut a nice whole in the side of the case (a chance to use my dremmel) it aint going in so it really has to be software.....

But I still may cut cos I haven't modded in a while.

Fanmate gives you approx 1 metre of cable. Just mount it on the the outside of the case and run the wires through one of the rear slots. Its under the following section @ the bottom of the page:
http://www.overclockers.co.uk/acatalog/copy_of_Vantec.html

You should really try to get Rivatuner working as really not that hard to work out a few button clicks and your done (plus its free)!

frost-t · 16 Feb 2006 at 22:37

You should really try to get Rivatuner working as really not that hard to work out a few button clicks and your done (plus its free)!

I'll read up on how this works but if ya see smoke then it's me getting it all wrong.....again.

Fan mate is a good idea but not sure if you can run it using the 3pin plug thats on the fan now so may need some modding but good all the same.

Lets see how things work out..........still never got rid of the BSOD though lol.

frost-t · 17 Feb 2006 at 16:55

Ran memtest overnight and ran test 09 for near 3 hrs and all results were ZERO errors.

Tried one last time to install the app to see if has magicly dissapeared but sadly the BSOD once again graced itself.