Associate
thats bang tidy, well done fella.
[Build Log] Back To Water!
- Thread starter .:SAmSuNG:.
- Start date
Thanks mate.
Ak ok, think i'll give it a miss then
Don't get me wrong I'm very happy now it's done but it would have took maybe 5 mins using normal flexible tubing and a lot lot cheaper.
Thanks glad it's getting such good feedback. Normally the tubing ends up looking better once collant is running through it.
I was finding it very difficult as the ram, cpu and gpu blocks were so close with lots of changes of direction to keep all the tubing running vertical or horizontal but using fittings to allow the bends to work out further apart helped loads. I wish I had taken a photo of my first attempt to compare.
Absolutely brilliant job! You should run a masterclass
Thanks it's turned out better than I expected.
Thanks mate my aim was to keep it looking as neat as possible to have mounted the top rad the opposite way around to how you would normally and the front rad so the ports are in the lower chamber.
I now have the headache of trying to get it all connected up in the lower chamber as it's very very tight. I spent a hour or so today trying to figure it out and made a little progress but I seem to need a never ending supply of fittings to get it to work.
I now have the headache of trying to get it all connected up in the lower chamber as it's very very tight. I spent a hour or so today trying to figure it out and made a little progress but I seem to need a never ending supply of fittings to get it to work.
Had a delivery today.
A second 780ti. This one is a EVGA SC. Along with a new block and 2 backplates for both cards.
They all fitted together with edge of the pcb colour coded black. Weighs loads.
Bit skint now but should finish it by end of month. Just need fittings I think now and my psu cables to be returned from pexon as had a incorrectly made 24 pin cable.
A second 780ti. This one is a EVGA SC. Along with a new block and 2 backplates for both cards.
They all fitted together with edge of the pcb colour coded black. Weighs loads.
Bit skint now but should finish it by end of month. Just need fittings I think now and my psu cables to be returned from pexon as had a incorrectly made 24 pin cable.
Small update
So when I started buying bits for this build not only did I decided it would be a good idea to spend £20+ on a sli bridge but to buy one that was the wrong length for my motherboard.
So plan b was a basic cable my mate got included in his motherboard.
As you can see it looks terrible and with the lengths taken elsewhere in the build it couldn't stay like that. I also couldn't bring myself to spending another load of money on these over priced items.
So went ahead and pulled the Evga bridge apart.
And back together with ribbon cable folded to length.
Thanks.
So when I started buying bits for this build not only did I decided it would be a good idea to spend £20+ on a sli bridge but to buy one that was the wrong length for my motherboard.
So plan b was a basic cable my mate got included in his motherboard.
As you can see it looks terrible and with the lengths taken elsewhere in the build it couldn't stay like that. I also couldn't bring myself to spending another load of money on these over priced items.
So went ahead and pulled the Evga bridge apart.
And back together with ribbon cable folded to length.
Thanks.
Associate
EK blocks just look simple and stylish. It's easy to see why they are the most popular choice.
Associate
nice mod mate
Fantastic build as well you know. I've been waiting for the ATX mid tower to come out because I thought I'd struggle to fit everything in the mATX but you've done an excellent job here. Looking forward to seeing it with the coolant in and up and running. Where are you putting the drives? Also what are you doing for a fan controller? Finally, any pics of the pump and res installed? I'm incredibly nosy.
Thanks.
Totally agree mate it was a easy choice. Just wish it was a bit cheaper.
Thanks.
Yea it's a bit of a squeeze. Drives I'm using a 250Gb m.2 drive that will be mounted between the gpus on the mobo itself and a 250gb samsung evo 2.5" behind the motherboard on the proper mounting point. I have a NAS so no need for any storage drives. Fans will be run off the included controller that's hidden behind the mobo which is controlled via the cpu header on the mobo. So they will all spin up and slow down depending on cpu temp.
I've not mounted the pump and res yet as it's so tight the loop in lower chamber needs to be finalised before I can drill the case. Will need to wait a few weeks till I get paid again to order more fittings.
Don't worry about the questions it's nice to have people show interest.
Associate
Out of interest. From the CPU block to the RAM block, how come you decided to go with that amount of fittings, and no just try and create a single U-Bend?
Either way, looks like a real nice clean build. Be interesting to see the temps
Either way, looks like a real nice clean build. Be interesting to see the temps