You need to be setting the timings to 9,9, 9, 26 with a commad rate of 2T and a voltage of 1.5V. these are settings that 'should' accomodate the Dominators and still run the XMS 3.
You could try slightly looser timings - 11,11,11, 28 just to see if you can get things stable.
If you can't try what i suggested a couple of posts ago - test to see if the XMS3 will run on their own at 1.5V. Try both dual channel slots too in case you have a DIMM slot compatibilty problem.
There's a chance that they may not work together - but equally you may have dodgy DIMM slot or the XMS3 needs a bit more juice (this is why you need to test the XMS3 on their own at 1.5V for stability confirmation).
You could try slightly looser timings - 11,11,11, 28 just to see if you can get things stable.
If you can't try what i suggested a couple of posts ago - test to see if the XMS3 will run on their own at 1.5V. Try both dual channel slots too in case you have a DIMM slot compatibilty problem.
There's a chance that they may not work together - but equally you may have dodgy DIMM slot or the XMS3 needs a bit more juice (this is why you need to test the XMS3 on their own at 1.5V for stability confirmation).
Last edited:
. thanks for your help ill just buy some more i think
not sure if this will help, also running ram at 1.5 volts