Crossfire 7970

dmhenson1989 · 9 Sep 2013 at 18:39

Also if you think I need more voltage what do you suggest I boost it up by

LtMatt · 9 Sep 2013 at 18:43

xTommy92 said:
Ahh right, when using Afterburner the Ice-Q Boosts voltage has always stuck at 1.250v but I always thought that was because it was a Boost card. Due to that I had overclock GPU1 (Twin Frozr) to 1.250v aswell. I will check out iTurbo as that could be the reason why my usage is a little too low aswell as my motherboard slacking.

Can I use the same clocks on iTurbo as I do on Afterburner?

Tom

Should be able to.

dmhenson1989 · 9 Sep 2013 at 18:52

Could some one re cap me on what I'm doing the. Please I'm a little confused.

My GPU2 randomly sticks at 99% so what do I do to solve this?

Also when I clock my GPUs to 1125/1575 and disable ulps i blue screen. Enabling stops the blue screen. So is ulps a must? If so how do I resolve this? Voltage? How much? How do I test if I need more voltage . I'm pretty sure it is the Msi twin froZr which is causing the crash with ulps disabled when I've oc'd it.

xTommy92 · 9 Sep 2013 at 18:55

dmhenson1989 said:
Could some one re cap me on what I'm doing the. Please I'm a little confused.

My GPU2 randomly sticks at 99% so what do I do to solve this?

Also when I clock my GPUs to 1125/1575 and disable ulps i blue screen. Enabling stops the blue screen. So is ulps a must? If so how do I resolve this? Voltage? How much? How do I test if I need more voltage . I'm pretty sure it is the Msi twin froZr which is causing the crash with ulps disabled when I've oc'd it.

Have you left the voltage at stock?

Tom

dmhenson1989 · 9 Sep 2013 at 19:02

Yes I have tom

LtMatt · 9 Sep 2013 at 19:02

dmhenson1989 said:
Could some one re cap me on what I'm doing the. Please I'm a little confused.

My GPU2 randomly sticks at 99% so what do I do to solve this?

Also when I clock my GPUs to 1125/1575 and disable ulps i blue screen. Enabling stops the blue screen. So is ulps a must? If so how do I resolve this? Voltage? How much? How do I test if I need more voltage . I'm pretty sure it is the Msi twin froZr which is causing the crash with ulps disabled when I've oc'd it.

Disabling ULPS should fix that (99% usage). Use afterburner to disable it then restart your pc.

What you need to do is add voltage to the gpu that can't run at those clocks. Either that or lower both cards clocks until the crappy one stops crashing.

dmhenson1989 · 9 Sep 2013 at 19:09

Well I'm pretty sure it's the Msi card because I ran the reference at 1125/1575 and the Msi and stock and no crash then I boosted the Msi to match and it crashed. Which obviously points to the Msi card. How do I add voltage and how much?

LtMatt · 9 Sep 2013 at 19:14

dmhenson1989 said:
Well I'm pretty sure it's the Msi card because I ran the reference at 1125/1575 and the Msi and stock and no crash then I boosted the Msi to match and it crashed. Which obviously points to the Msi card. How do I add voltage and how much?

Pain in the rusty sheriffs badge, but maybe you need to take both cards out and test them each really thoroughly and find out which one is the stinker. Then you can add voltage to make the crappy one not crash. Its up to you now.

Use my overclocking guide.

dmhenson1989 · 9 Sep 2013 at 19:48

Matt where exactly do i drag the premium.exe into?

dmhenson1989 · 9 Sep 2013 at 19:51

it doesnt seem to be deleting all entries on driver fusion? when i restart and analyse again to check theres still loads there.

LtMatt · 9 Sep 2013 at 19:51

dmhenson1989 said:
Matt where exactly do i drag the premium.exe into?

Ah jeez you're killing me here dude.

Ahem...

....

dmhenson1989 · 9 Sep 2013 at 19:53

yeh i did that then i analyse AMD display files click delete, reboot. analyse again and they are still there?

LtMatt · 9 Sep 2013 at 19:55

dmhenson1989 said:
yeh i did that then i analyse AMD display files click delete, reboot. analyse again and they are still there?

If that happens you did something wrong.

dmhenson1989 · 9 Sep 2013 at 19:56

Well I dont know what i can possibly do wrong other than miss the button Delete? lol nless i am really that bad but ive tried 3 times! :-p

LtMatt · 9 Sep 2013 at 19:57

dmhenson1989 said:
Well I dont know what i can possibly do wrong other than miss the button Delete? lol nless i am really that bad but ive tried 3 times!

The non premium version leaves files behind.

Don't worry about those files, it won't matter.

dmhenson1989 · 9 Sep 2013 at 20:03

hmmm this is highly frustrating for me as it is for you. Sorry

I installed Driver Fusion with the link you gave. After it had installed i dragged the .exe file into driver fusion which then replaced the old one still no luck.

LtMatt · 9 Sep 2013 at 20:04

dmhenson1989 said:
hmmm this is highly frustrating for me as it is for you. Sorry I installed Driver Fusion with the link you gave. After it had installed i dragged the .exe file into driver fusion which then replaced the old one still no luck.

Don't worry about it. If a few files are left behind it won't matter.

Five.Stars · 9 Sep 2013 at 20:28

Are you running driver fusion/ sweeper in safe mode?

dmhenson1989 · 9 Sep 2013 at 20:30

no not in safe mode. and im very very happy to say. im back to square 1 now. pc totally screwed bsod'ing after i install new drivers? oh god help me!

LtMatt · 9 Sep 2013 at 20:32

Driver fusion only removes AMD files, nothing else. Might be time to run memtest maybe.