Dead.

Jamin280672 said:
Shame, im not far from Brum, id of just thrown a working PSU in it to see if it fired up.

just have a look at a diagram for a 24pin PSU connector and see which voltages should be coming out of which lines and test with a multimeter.

Edit: Heres one, most of them are grounds anyway so its pretty easy to test:

CDHbax0.jpg
Click to expand...
Tested rails and all fine.

I have just noticed with everything back connected and power on that there is a faint flashing from the pwr led on the motherboard. Much dimmer than usual and hardly noticeable but a consistently timed flash nonetheless. What could this indicate?
 
Jamin280672 said:
Yes your other hardware would work with that and its a good choice to be fair, however, im pretty sure the XTs dont come with a cooler, so you would need one for socket AM4 too.

Check the compatability list for the motherboard you are interested in too see if it will be happy with your RAM.
Click to expand...

This is my current cooler, would this suffice?

Not sure if this photo thing is working.

BGdzvqf

https://imgur.com/a/BGdzvqf
 
Orangepeel said:
I have just noticed with everything back connected and power on that there is a faint flashing from the pwr led on the motherboard. Much dimmer than usual and hardly noticeable but a consistently timed flash nonetheless. What could this indicate?
Click to expand...

+5v SVB (Standby rail) purple wire, is that reading 5v when you have it all connected? It could be a power good issue, but it seems like there could be more to it.

What happens if you try to power the board/CPU/RAM (1 module only) only, outside of the case?
 
You must log in or register to reply here.
Back
Top Bottom