• Notice regarding image hosts and attachments. See here.

Decent game controller?

Yeah that is where the abxylute P5 comes in given it's £60 and has nicely claibrated HE sticks, otherwise same quality as official DS/DSE and same size etc with same haptics.

Does it weigh the same though and have the back paddle things?

Edit: Yes I forgot you posted about it.
 
Last edited:
It has back paddles yeah, The P5 is 284 grams, the normal DS is 280 grams and the DSE is heavier at 325 grams looking it up online. the extra DSE weight will come from the extra materials needed to house the swappable sticks of course.
 
For £60 it could quite easily be justified as an alternative option. I don't use the Defender much anymore, found the buttons too clicky and annoyed me with metallic ping noises when you move sticks to hard/far.
 
  • Like
Reactions: mrk
£60 is an insane price really, I've got no idea how they're managing to make it that price and still offer the features/performance that they are.

I paid £60 just for the specific shoulder buttons this Firebird PS4 controller :km:
 
£60 is an insane price really, I've got no idea how they're managing to make it that price and still offer the features/performance that they are.

I paid £60 just for the specific shoulder buttons this Firebird PS4 controller :km:

It's just that the Microsoft and Sony pads are so overpriced, and due to the lack of competition, they got away with it for years.
 
Last edited:
£60 is an insane price really, I've got no idea how they're managing to make it that price and still offer the features/performance that they are.

I paid £60 just for the specific shoulder buttons this Firebird PS4 controller :km:

Saw you coming lol.
 
Screenshot 2026-11-17 111614.webp


Just had a quick play in Ratchet & Clank Rift Apart with the abxylute as it's one of the games that supports full dualsense features. Feeling the wind and footsteps and the feedback as you use various gadgets and things is quite cool, the footstep differences and how the haptics react putting on the gravity boots, debris flying around you are felt too.

Quite cool and feels just like it did with the Hexgaming which is an official dualsense on the inside.
 
Just tested out overclocking the abxy P5, I think official DualSense controllers can OPC to 8K (4k actual), I cannot recall what my old Hexgaming Phantom OCd to but must have been similar, anyway this OCs to 1K in the HIDUSBF tool, which equates to 500Hz read by software:

P5 1000Hz.webp


Some other info there too, for HE sticks this is good for steps/tremor, but TMR is superior as evidenced by the Steam Controller test below:
Steam Controller 250Hz.webp



The resolution/steps/tremor etc remain the same regardless of OCing which is expected. Steam controller's sensor readout is 12-bit like GameSirs etc that also use TMR sticks hence the significantly higher step count and higher tremor as it's reading every little fraction of movement of the sticks (a good thing IMO). The P5 uses the same bit depth and sensor readout as an official DualSense so abxylute has also cloned the specs internally it seems.

Motion sensors are 16-bit for all 6-axis controllers though.
 
Just tested out overclocking the abxy P5, I think official DualSense controllers can OPC to 8K (4k actual)
Dualsense & Dualsense Edge controllers can only overclock to 1k 'actual' for their usb polling rate - but the lordofmice hidusbf software can essentially have that USB port that's being used upped to a scan rate of 8k hz.

Basically you're never getting more than 1k polling on a base Dualsense or DSE controller.
 
Ah that makes sense, either way I saw no noticeable performance diff in games etc at the higher rate, both seemed just as responsive and stuff, same as I observed on the Hexgaming back then.
 
Did not realise it was this cheap but I have ordered a Raspberry Pi Pico 2 W off Amazon, only £11.80 and will flash the DS5Dongle firmware on it. It then gives you a web driver interface like with modern mice, gamepads and keyboards to config everything once paired to the DS wirelessly: https://ds5-0.8.awalol.eu.org/

This setup gives any PC full DualSense features via wireless and offers additional functions like polling rate control and stuff it seems.

Will be here tomorrow so am excited to check this out.

Full guide:
To set up a Raspberry Pi Pico 2 W as a wireless DualSense dongle on your PC, flash the open-source DS5Dongle firmware onto the board and pair your controller directly to it.


Step 1: Gather Your Gear
  • Raspberry Pi Pico 2 W: Make sure it is the 2 W model (the standard Pico 2 lacks Bluetooth/Wi-Fi).
  • Micro-USB data cable: Must support data transfer, not just charging.
  • DualSense or DualSense Edge controller: Ensure it is turned off and disconnected from your PC's built-in Bluetooth.

Step 2: Download the Firmware
  1. Go to the awalol/DS5Dongle GitHub Releases page.
  2. Under the latest release, download the .uf2 firmware file matching your controller:
    • Standard DualSense: Download the main ds5-bridge-vX.X.X.uf2 file.
    • DualSense Edge: Look for the .uf2 file labeled with DSE (or inside the bundled zip if separated).

Step 3: Flash the Firmware onto the Pico 2 W
  1. With the Pico 2 W unplugged, press and hold the white BOOTSEL button on the top of the board.
  2. While still holding BOOTSEL, plug the Pico 2 W into your PC using the micro-USB cable, then release the button.
  3. Your PC will detect the board as a removable USB drive (usually named RP2350).
  4. Drag and drop (or copy and paste) the .uf2 file you downloaded into that drive folder.


  5. Once the file finishes copying, the Pico 2 W will automatically reboot and disconnect as a storage drive. (Note: Windows will not show a controller yet—it remains hidden until a controller pairs to it).

Step 4: Pair Your DualSense Controller
  1. Put your DualSense into Bluetooth pairing mode by pressing and holding the Create button (top-left of the touchpad) and the PS button at the same time until the light bar flashes rapidly blue.
  2. Bring the controller close to the Pico 2 W. The board will automatically detect and connect to it. (If it doesn't connect right away, briefly press the BOOTSEL button once on the Pico to trigger a 30-second pairing scan, or unplug and replug the Pico while the controller is blinking).
  3. Once paired, the LED on the Pico 2 W will turn solid green, your controller's light bar will stabilize, and Windows will recognize it as a wired DualSense controller.

Step 5: Enable Wireless Audio & Haptics in Windows
Because DualSense HD haptics work via audio signals sent to the controller:
  1. Open Windows Sound Settings (or click the speaker icon in your taskbar).
  2. Ensure the DualSense Wireless Controller speaker output is enabled and not muted, though you can keep your main game audio routed to your normal speakers or headset—supported PC games will automatically send haptic vibration data to the controller's secondary channels.

Helpful Controls After Setup
  • Reconnect later: Just press the PS button on your controller; it will wake up and connect straight to the Pico 2 W.
  • Update firmware later: Triple-click the BOOTSEL button while plugged in (or unplug it and hold BOOTSEL while plugging it back in) to bring back the USB drive and drop in a newer .uf2 file.
 
Last edited:
Back
Top Bottom