To set up a Raspberry Pi Pico 2 W as a wireless DualSense dongle on your PC, flash the open-source DS5Dongle firmware onto the board and pair your controller directly to it.
Step 1: Gather Your Gear
- Raspberry Pi Pico 2 W: Make sure it is the 2 W model (the standard Pico 2 lacks Bluetooth/Wi-Fi).
- Micro-USB data cable: Must support data transfer, not just charging.
- DualSense or DualSense Edge controller: Ensure it is turned off and disconnected from your PC's built-in Bluetooth.
Step 2: Download the Firmware
- Go to the awalol/DS5Dongle GitHub Releases page.
- Under the latest release, download the .uf2 firmware file matching your controller:
- Standard DualSense: Download the main ds5-bridge-vX.X.X.uf2 file.
- DualSense Edge: Look for the .uf2 file labeled with DSE (or inside the bundled zip if separated).
Step 3: Flash the Firmware onto the
Pico 2 W
- With the Pico 2 W unplugged, press and hold the white BOOTSEL button on the top of the board.
- While still holding BOOTSEL, plug the Pico 2 W into your PC using the micro-USB cable, then release the button.
- Your PC will detect the board as a removable USB drive (usually named RP2350).
- Drag and drop (or copy and paste) the .uf2 file you downloaded into that drive folder.
- Once the file finishes copying, the Pico 2 W will automatically reboot and disconnect as a storage drive. (Note: Windows will not show a controller yet—it remains hidden until a controller pairs to it).
Step 4: Pair Your DualSense Controller
- Put your DualSense into Bluetooth pairing mode by pressing and holding the Create button (top-left of the touchpad) and the PS button at the same time until the light bar flashes rapidly blue.
- Bring the controller close to the Pico 2 W. The board will automatically detect and connect to it. (If it doesn't connect right away, briefly press the BOOTSEL button once on the Pico to trigger a 30-second pairing scan, or unplug and replug the Pico while the controller is blinking).
- Once paired, the LED on the Pico 2 W will turn solid green, your controller's light bar will stabilize, and Windows will recognize it as a wired DualSense controller.
Step 5: Enable Wireless Audio & Haptics in Windows
Because DualSense HD haptics work via audio signals sent to the controller:
- Open Windows Sound Settings (or click the speaker icon in your taskbar).
- Ensure the DualSense Wireless Controller speaker output is enabled and not muted, though you can keep your main game audio routed to your normal speakers or headset—supported PC games will automatically send haptic vibration data to the controller's secondary channels.
Helpful Controls After Setup
- Reconnect later: Just press the PS button on your controller; it will wake up and connect straight to the Pico 2 W.
- Update firmware later: Triple-click the BOOTSEL button while plugged in (or unplug it and hold BOOTSEL while plugging it back in) to bring back the USB drive and drop in a newer .uf2 file.