* Desk and Room Gallery*

Kei · 11 May 2014 at 23:40

New tannoy 10" super red monitors (10" dual concentric) dwarfing the old diy 8" kef speakers that are now in between. Starting to make the 50" plasma look a bit small. I'm thinking of losing one of the disc spinners and fitting another power amp to offload all amp duties from the av receiver.

Hopefully I'll be replacing the 19" neovo TN panel with a 21" iiyama VA with a 1600x1200 resolution to match the 1920x1200 dell VA.

Been tidying my wiring up as it has been chaotic up to now. Got a 12 way powercon distribution panel and a 6 way mains block, which replaces my 3 extensions. (6 way and 4 way mains + 6 way IEC. The 6 way mains block switch exploded at 4am one morning about a month back)

As yet i'm not actually using all 12 outlets. (partly because i only had 10 powercon plugs) They are far nicer to work with vs IEC as they twist and lock in place rather than friction fit.

whyscotty · 12 May 2014 at 21:51

B4

Now

GefGz · 12 May 2014 at 22:03

What's that chair Scotty?

jimbaw · 12 May 2014 at 22:09

whyscotty said:
B4

Now

what chair is it?

whyscotty · 12 May 2014 at 22:12

GefGz said:
What's that chair Scotty?

jimbaw said:
what chair is it?

Chiro Plus Full Leather Chair

khemist · 12 May 2014 at 22:16

whyscotty said:
Chiro Plus Full Leather Chair

I'll get that chair ordered yet!.

whyscotty · 12 May 2014 at 22:33

khemist said:
I'll get that chair ordered yet!.

jimbaw · 13 May 2014 at 12:33

ok cheers!

jimbaw · 13 May 2014 at 12:34

update: I have just checked the price. I'll stick to my argos one for now haha

Rhoxy · 13 May 2014 at 15:05

trimmer1980 said:
Yep this will be fine, the stand supports 75mm and 100mm

Trying to set the stand up now with the monitors, and the the monitors just tilt face forward. The wrench won't turn the bolt any further either. Am I doing it correct? Since the manual is a little vague.

Thanks.

trimmer1980 · 13 May 2014 at 20:33

Rhoxy said:
Trying to set the stand up now with the monitors, and the the monitors just tilt face forward. The wrench won't turn the bolt any further either. Am I doing it correct? Since the manual is a little vague.

Thanks.

Look at the plate and the arm attached if you remove the black plastic you will be able to screw them tight.. mine are solid

remove the other side to this, should be a bolt you can tighten, you will need to remove the monitor if attached to get to it

trimmer1980 · 13 May 2014 at 21:01

chillidog · 13 May 2014 at 21:07

Pdog said:
Where are those cable tidies from please?

dacads said:
Looks like hoover pipe to me

i don't think he has told his misses that he has cut the piping from the back of the washing machine

trimmer1980 · 13 May 2014 at 21:19

Rhoxy · 13 May 2014 at 22:31

Yeah, I knew about the caps but the actual bolt took such a turn it felt like it was going to break. I finally got it sorted though. It a great monitor stand, thanks for the recommendation.

Thanks for all the help.

{SAS}TB · 15 May 2014 at 21:53

Gone from

to

jimbaw · 15 May 2014 at 23:23

nice and simple. I like it! is that a wine cooler on the far right?

Jay85 · 16 May 2014 at 00:26

Blackhawk47 said:
Still rocking the Antec Mini P180...nothing much has changed apart from the new mouse/keyboard.

Ah the mighty Mini P180, you're one of the very few who still rock this case. Apem is joining you as well as he just ordered one too.

{SAS}TB · 16 May 2014 at 06:03

jimbaw said:
nice and simple. I like it! is that a wine cooler on the far right?

Thanks and yep (more a beer fridge though)

skillfulmmd · 16 May 2014 at 16:10

Setup

Potato quality!

*** Desk and Room Gallery***

* Desk and Room Gallery*