Associate
Not much of a plan reallly. Just measurements of the draws, the desk and what space I had to use. Order 2m oak top, give it a sand, oil it and build the draws and plonk thing on with some rubber grommets
*** Desk and Room Gallery***
- Thread starter ThundyCat
- Start date
Not much of a plan reallly. Just measurements of the draws, the desk and what space I had to use. Order 2m oak top, give it a sand, oil it and build the draws and plonk thing on with some rubber grommets
I owned 2 of these monitors back in the day when new, very high quality monitors. I agree compared to most budget LCD screens these are better.
However I now run glass fronted AG Neovo monitors, if you can imagine the high contrast you have from your screens combined with digital this is what I have.
So in future if that screen fails, or you want to try LCD screens look at the glass fronted Ag Neovos for picture quality similar to what you currently like.
Soldato
I'm getting that desk tomorrow!!!
Sorry, a bit random...
hehehe, if you could let me know the distance between the legs and the edge of the table that would be great
hehehe, if you could let me know the distance between the legs and the edge of the table that would be great
4.1" for the legs and 2.8" for the actual bracket. That's measuring the table end on the left.
Soldato
4.1" for the legs and 2.8" for the actual bracket. That's measuring the table end on the left.
Thanks mate, that is very helpful
Soldato
4.1" for the legs and 2.8" for the actual bracket. That's measuring the table end on the left.
If you don't mind me asking, what size table did you get? We are looking at the 140×60 cm. Do you know what is the size in between the legs?
Many thanks!
I got the corner desk left. The one you want the same (or very similar), just without the corner piece.
Here's the link to it.
http://www.ikea.com/gb/en/catalog/products/S79006424/#/S99006423
Last edited:
Yaaas. You know what's up.
Rocking a hp p1130 (manufactured 2004) bought brand new sealed off a pallet just a few years ago myself. It would take something extremely special for me to move away from this screen.
Associate
Associate
- Joined
- 4 Dec 2008
- Posts
- 1,970
Cheers
Surveyor
Associate
Associate
Images over 1,280 pixels wide should be placed in spoiler tags as I've done for you.
Cheers
Surveyor
Last edited:
Last edited:
Caporegime
Recently changed from:
To:
I love it now I'm finally used to it, but it took a while to adjust!
Just need to find a pair of used Titans, and I'll be set for Project Cars and HEAVILY graphically modded Skyrim in 4K.
To:
I love it now I'm finally used to it, but it took a while to adjust!
Just need to find a pair of used Titans, and I'll be set for Project Cars and HEAVILY graphically modded Skyrim in 4K.
Soldato
Love the setup Blackwhite!
I can see that you have put a couple of MALM desks next to one another, the one with the drawers. Is the bigger draw a filing cabinet or a cupboard?
I can see that you have put a couple of MALM desks next to one another, the one with the drawers. Is the bigger draw a filing cabinet or a cupboard?
Soldato
Ahh, another Bekant desk - love mine - room for a 24" monitor, pc on the desk, microserver tucked way on there too, and there's probably just enough space for a 28" 4k monitor...
Last edited:
Caporegime
Well you can see on mine there, there were 3x 24" monitors and half a computer, and now a 28" monitor, a whole computer, and loads of free space.
Well you can see on mine there, there were 3x 24" monitors and half a computer, and now a 28" monitor, a whole computer, and loads of free space.
How is your wheel Acme is that the G27? I am thinking about getting one.
Caporegime
It is the predecessor to the G27, the G25. It is basically the same thing though. The G27 just has a few more buttons, stiffer pedals and a more tactile gear shift.
It is quite good yes, much improvement over the DFGT I had previously, my only gripe is that it feels a bit strange because the wheel is much smaller than a real one. I suppose most sim wheels are like that though.
It is quite good yes, much improvement over the DFGT I had previously, my only gripe is that it feels a bit strange because the wheel is much smaller than a real one. I suppose most sim wheels are like that though.