Diagnosing DRIVER_CORRUPTED_EXPOOL BSOD

Disco_P

Disco_P

Disco_P

Soldato
Joined
30 Dec 2013
Posts
6,497
Location
GPS signal not found. (11)
Specs
i5 2550K
MSI Z77 MPower
8GB Corsair Vengeance 1.35v 1600Mhz Ram
Corsair RM850
Custom Liquid Cooling
Windows 8.0

So I have been having a few BSODs recently. I thought it was just a bad OC on a temporary cheap board. But I received my old board back after a successful RMA and it still isn't stable - even at stock. So something must be wrong somewhere. I haven't had any BSODs during normal PC usage (eg gaming or browsing) but they very quickly happen under stress from Intel Burn Test.

Here is a Bluescreen viewer generated HTML report on my recent BSODs. All have the same error (DRIVER_CORRUPTED_EXPOOL) and most point to Windows OS files as the failed driver.

https://www.sendspace.com/file/j6f9do

Any ideas as to the cause? I suspect either that the OS has corrupted files from the MoBo swaps (old rubbish mobo was a gigabyte Z68X-UD3-B3) or when I was trying to get a half decent overclock on the old board the Vdroop went crazy and pushed 1.5+V through the CPU before freezing and then I had a few issues getting it to boot and no success in getting any overclock to work.

Many Thanks

Toaster
 
Last edited:
freddie64 said:
Should be 1.50v for the RAM.

If it put 1.5+v through the CPU it may damaged it.
Click to expand...

It's LoVo RSM so 1.35 is the spec voltage and the voltage set by XMP

lude1962 said:
I'd do a clean install of windows.
Click to expand...

That is something I am definitely considering. Did a SFC /scannow on command prompt and a butt load of things were "fixed". Its just installing windows and all my programs etc is a pain.
 
You must log in or register to reply here.
Back
Top Bottom