Fix For H80i/H100i LED Cold Boot LED Bug

Soldato
Joined
19 Feb 2007
Posts
15,386
Location
Northampton
So after updating to the latest Corsair link *2.6.5214* the LED's on my unit would reset to an odd colour, So instead of red it would go a rose coloured pink.

So I decided to experiment a little :D

So far it seems it's only effecting people who update from 1.05 to 1.07 but units that ship with 1.07 appear to be unaffected.

Now this is a problem related to the firmware version 1.07 which is built into the latest release.

I have tested this on 3 different H100i's and all behave the same when updated from 1.05 to 1.07.

The fix is actually quite simple, Uninstall all link software and download the older *2.4.5110* link version which allows for manual firmware updates.

Once you have it downloaded and installed you want to download firmware version 1.05, Update/rollback the firmware to 1.05 from 1.07 and once done your LED's shouldn't change upon a cold boot anymore.


****Please download in Firefox or Chrome, Internet Explorer for some reason saves it as a .php file instead of a .zip/.rar file****


Corsair Link - 2.4.5110 - http://www.corsair.com/~/media/Corsair/download-files/drivers/link/Corsair-Link-Installer-RC-v2-4-5110.exe

H80i 1.05 - http://forum.corsair.com/v3/attachment.php?attachmentid=12219&d=1361765933

H100i 1.05 - http://forum.corsair.com/v3/attachment.php?attachmentid=12220&d=1361765948


Installation -

1. Uninstall Corsair Link.

2. Reboot.

3. Install Corsair Link Version 2.4.5110.

4. Flash your H80i/H100i to 1.05 *sierra2.bootloader has stopped working* will appear once the progress bar gets to 100% but don't worry this is normal.

5. Re-launch Corsair Link and set your desired color i.e Red, Green, Blue etc.....

6. Fully shut down your rig and wait about 60 seconds.

7. Boot up and after about 5 seconds the CPU block LED will change from white to your previously selected colour.

Hope this helps
happy1.gif
 
Last edited:
Good work Dice. As i said to texan though with these H Led coolers if it works, its best to leave well alone as they're very temperamental. I went through three of them before finally switching to a H110 with no led.

Thank you :)

Thought I'd share as it was really annoying me until I found the solution by experimenting with different firmwares and Corsair Link versions :)

I've just set mine to blue & unplugged the USB. It's not changed colour since.

This mainly only happens to people updating from 1.05 to 1.07.
 
Last edited:
Hi Dice, following those instructions, downloaded 2.4.5110 and installed then from your link for the 1.05 firmware downloaded and tried to update/rollback from the link software, I chose the device to update then when I'm asked for a firmware file I can't choose the file downloaded as it doesn't appear when I go to the location I put it.
Double clicking the file itself and I get the following message "windows can't open this file" "File attachment.php"

What am I doing wrong?

Might sound like a dumb question but before you go to choose the file you have unzipped it right ?
 
Ok guys, I was advised to give firefox a try as I use internet explorer, so just installed firefox and hey presto I got the zip file, have now installed older firmware and reset my colour, did cold boot and and my colour is now restored. Thanks Dice very much appreciated and I think it was you on the Corsair Forum who advised firefox, brilliant dude thank you so much, very happy bunny again and I won't be updating the bugger again. Thanks everyone.

Yeah I just replied to you on the Corsair forums :p

I'll add Firefox to the suggested software in the opening post :)
 
Back
Top Bottom