FX-8350 Overclock

humax · 21 Nov 2015 at 22:10

The Bugger keeps going back to Auto

:mad:

jbh110tdi · 21 Nov 2015 at 22:12

only reason I suggested his option 3 was there was a poster saying there was issues with rev 3 boards.. Ive got the same board but sure its older.

Ive just replaced the H80i with a phanteks cooler on my 4690k and its running cooler on realbench and I now have piece of mind of no leaks

humax · 21 Nov 2015 at 22:12

Got the 212 back on and found some more paste. Ran it @4Ghz and the highest temp it hit was 55C in IBT banged it up to 4.4Ghz highest temp it hit was 59C

.

jbh110tdi · 21 Nov 2015 at 22:13

humax said:
Got the 212 back on and found some more paste. Ran it @4Ghz and the highest temp it hit was 55C IBT banged it up to 4.4Ghz highest temp it hit was 59C

what paste were you using previously?

humax · 21 Nov 2015 at 22:19

Arctic Cooling. Akase-AK450. Tuniq-TX1. The paste I'm using now is Cooler Master But its all old stuff so i don't know if it goes off

.

humax · 21 Nov 2015 at 22:21

jbh110tdi said:
only reason I suggested his option 3 was there was a poster saying there was issues with rev 3 boards.. Ive got the same board but sure its older.

Ive just replaced the H80i with a phanteks cooler on my 4690k and its running cooler on realbench and I now have piece of mind of no leaks

What Temps are you getting @4.4Ghz with that cooler ?

.

This never ends well · 21 Nov 2015 at 22:24

Something is not right if it cannot save the voltaged.

If your volts are on auto, they must be just jumping about and could be going upto 1.5volts.

Can you download hwifo64 and run ibt, so i can see if the volts are jumping around, i will post a picture in a minute of what i want you to show me.

humax · 21 Nov 2015 at 22:25

This never ends well · 21 Nov 2015 at 22:27

Where this says vcore can you show me this after running ibt.

humax · 21 Nov 2015 at 22:30

No prob going to run it now

jbh110tdi · 21 Nov 2015 at 22:35

humax said:
What Temps are you getting @4.4Ghz with that cooler ?.

the H80i used to keep the 8350 under 55c at 4.4ghz running IBT I never tried realbench.

the 4690k @ 4.5Ghz using the H80i running realbench would go to 68c the Phanteks has it running at 44c on its highest core running realbench

jbh110tdi · 21 Nov 2015 at 22:37

Phanteks PH-TC14PE

humax · 21 Nov 2015 at 22:59

.

This never ends well · 21 Nov 2015 at 23:04

1.356 was the max vcore and thats with the overclock at 4.2ghz.

humax · 21 Nov 2015 at 23:05

jamiehard1989 said:
1.356 was the max vcore and thats with the overclock at 4.2ghz.

Is that a lot of Volts ?

jbh110tdi · 21 Nov 2015 at 23:06

this was my 8350 with the H80i @ 4.4Ghz

humax · 21 Nov 2015 at 23:17

jbh110tdi said:
this was my 8350 with the H80i @ 4.4Ghz

Your V-Core is lower than mine

.

This never ends well · 21 Nov 2015 at 23:28

humax said:
Is that a lot of Volts ?

With them volts i can get 4.6ghz stable on mine.

In bios what settings have you got disable and enable as im trying to work out why you cannot save the vcore.

This never ends well · 21 Nov 2015 at 23:30

humax said:
Your V-Core is lower than mine

.

No he's was higher.

humax · 21 Nov 2015 at 23:31

jamiehard1989 said:
With them volts i can get 4.6ghz stable on mine.

In bios what settings have you got disable and enable as im trying to work out why you cannot save the vcore.

Will take some pics