Gigabyte Help

Associate
Joined
26 Mar 2009
Posts
2
I have recently bought a Gigabyte GA-H61M-D2-B3 mobo and built a system with a gainward graphics card 1gig version (I dont know the model number but it supports HDMI output)

Everything was working apart from the HDMI and sound output through it. I realise the spdiff connection should be made but I cannot find it. Had a look around a bit took the graphics card out and back in. And now my system wont even power up.

If anyone has any suggestions I would be gratefull.
 
Have you checked all components are fully seated?

power connections to mobo, 24 pin + 4/8 pin?

power to graphics card 2 x 6 pin?

Spdiff may be an option on that board requiring a seperate riser?

Is power supply good?

Is there output from the dvi port, on board graphics?

andy.
 
Last edited:
I have checked all the connections on the motherboard and all seems well however. I havent checked the power supply so that is the next step.

I havent tried resetting the cmos so I will try that later today.
 
when you say it won't power up, do you mean no fans spin etc ?

as for hdmi and sound output through it did you change the output setting to use hdmi ?
 
Back
Top Bottom