**GOT AN EVGA GRAPHICS RELATED QUESTION OR NEED SUPPORT - ASK HERE!!**

Hi, I was able to resolve the issue last night by updating the bios and using CCleaner to clear up my registry. The computer now boots in seconds once again and the new card is performing brilliantly. Thanks for all your help.
 
hi Dominik

ive got 2 evga 770 classified and want to use the 2nd bios, can I change the switch on both and update the bios in sli or does it need to be done one card installed at a time cheers
 
Hi,

normally there should be the latest BIOS already flashed also on the second chip. Can you have a look which power target it shows you on second BIOS? Which BIOS are you going to flash? If it is one of our windows flash BIOS it will flash both cards at the same time.
 
EVGAdominik said:
Hi,

normally there should be the latest BIOS already flashed also on the second chip. Can you have a look which power target it shows you on second BIOS? Which BIOS are you going to flash? If it is one of our windows flash BIOS it will flash both cards at the same time.
Click to expand...

Thanks for that will switch them both when I get home and see what they say :)
I will be using the 3778LC32.zip from my products page
 
just added the updated BIOS to the OC part as original bios was 80.04.c3.00.70(P2005-0000) NEW 80.04.c3.00.72(P2005-0000) but power target was 100% on both??
 
Hi,

in this case please register the card to your EVGA account, when you then enter the detail page of the product in your account there will be a download feature at the lower end were you can download the OC BIOS.
 
EVGAdominik said:
Hi,

in this case please register the card to your EVGA account, when you then enter the detail page of the product in your account there will be a download feature at the lower end were you can download the OC BIOS.
Click to expand...

Cheers only got the one bios download option What should the POWER TARGET
read with OC BIOS? and what version is the bios?
 
Cheers Dominik the flash worked as bios changed but my power target is showing at 100 percent?
Should I just manually change it as this is the 4gb 770 classified
 
Hi Dominik

What kind of card will evga supply if my brand new step up card I received was faulty and returned to evga under 30 days will it be a brand new replacement or a refurbished card.?
Cheers
 
delpy8 said:
Cheers Dominik the flash worked as bios changed but my power target is showing at 100 percent?
Should I just manually change it as this is the 4gb 770 classified
Click to expand...

sound like a missunderstanding.
On default it do always show 100% but on a "normal" card you can only raise it up to 106% and on dual BIOS cards up to 110%/ or more depending on the model but you will need to set this up manually
 
riskyfrisky said:
I've got an EVGA GTX 770 Superclock - if I take the ACX cooler off and stick a water block on the card, will I void the warranty?
Click to expand...

Hi,

this will not void the warranty!! We will only void the warranty if you physically damage the card during the built. Please be aware that the card will need to get send in originally conditions for RMA so you will need to mount the ACX cooler on it again.
 
Hi Dominik

Any idea why my temps jump up to around 83c when I install
My classified 770 backplate done this twice and when removed it's around 10 to 15 degrees cooler?
 
Hi delphy,

whuat? Have there been Screws with the backplate?
Did you already check the footprint of the TIM at the cooler?
Maybe the TIM do exactly fit at the normal installation and when you then open the screws the contact get lost... I would suggest to place new TIM, mount the backplate again and have a look if it will happen again.
When you install the backplate please do also make sure to install all Screws but screw them only 80% in and then start with the 4 big ones arround the GPU and after the first always the one of the opposite site... then the other small ones arround the GPU, after this the ones at the power management and then the rest....
 
You must log in or register to reply here.
Back
Top Bottom