I had a quote and a conversation with the Octopus installers earlier this week.
The price was good, £6k (inc £5k grant). I know I need a lot of remedial work to the heating system because of what’s installed now. I’ve got is a 20 year old Range Powermax on a vented radiator loop (delivers mains pressure hot water).
It’s not actually that much more than getting what I have replaced with an unvented cylinder and gas boiler based on what my neighbour paid in 2018. A combi would be cheaper to install but you lose the mains pressure hot water and the ability to heat with solar.
From the conversation I managed to gleam a few things. They are targeting flow temperatures of 50C and SCOP of 300%. It will be cheaper to run than a gas boiler based on that efficiency and lifetime costs will be in your favour.
I’d not want to go any lower on the SCOP for it to work out against gas. When you have the survey, see if there are any additional quick wins they can do (extra charge no doubt) to bring the peak flow temp (50c) down and therefore the SCOP up.
I forgot to ask if they install weather compensation - it’s quite important for efficiency. The 50C flow temp will be based on a -2 outside temp and 21 internal temperature. When it’s not -2 or you are just heating to set back temps, you’ll want the system to automatically bring the flow temp down to stop it cycling (on, off, on, off etc).
I’m pretty close to pulling the trigger, I think I’d want to speak to some other installers first and see what they can do in terms of target efficiency and cost. If Octopus can do it for that price, I’m sure others can as well.