Help Me With These Bath Taps Please

[Vern1961]

Need to get the tops of to identify the leaking glands or washers so I can replace them. Normally there's a little flip up that reveals a screw that you undo to get at the glands but not present. The whole top also appears to be a solid unit so the dome doesn't unscrew from the base, unless it's seized. I don't really want to pay £100 for a plumber callout as changing the glands is generally a two minute DIY job. Any thoughts or suggestions welcome.

 

[radderfire]

Use a photo of the taps to do a "search by image" on Google. Hopefully you'll get a match and then you'll know the manufacturer and can ask them.

 

[JRJ]

Initial thoughts are the top cap and it's tight/gunked up, or when they're closed continue tightening them to see if they unscrew?

 

[Diggsy]

Not unlike this…

Bristan Omega-Basin Spare Parts Omega-BasinR1 95A5748F132213 1

Bristan Omega-Basin Spare Parts Omega-BasinR1 95A5748F1322131

www.tapmagician.co.uk

…basically unscrew the dome top, which will be easier said than done as it’s likely jammed with limescale.

 

[Grim5]

Would suspect it screws off

The silicon behind the taps also needs work, you may have water going behind the tub there causing damage