help new rig keeps crashing in games?

browner0189 · 28 Nov 2013 at 09:40

ThaReaperGuy said:
http://files.extremeoverclocking.com/file.php?f=205

This is the page you're looking for, half way down:

Download Locations > Primary Download Site

thanks got straight away with your link now which test do I do? small ffts, in place large ffts, blend or custom? and how long do I run the test for 6-8hr

wazza300 · 28 Nov 2013 at 11:15

do a blend test and look to see what load cpu v is in cpu-z

browner0189 · 28 Nov 2013 at 21:02

wazza300 said:
do a blend test and look to see what load cpu v is in cpu-z

ok I will do this do I have to do it for a certain amount of time or is it irrelevant at the moment?

wazza300 · 28 Nov 2013 at 21:38

Try just 30minutes atm,and see howmuch CPU v is being used

browner0189 · 29 Nov 2013 at 11:10

wazza300 said:
Try just 30minutes atm,and see howmuch CPU v is being used

ok I done a blend test this morning and the results was like this (core voltage min 1.240v ave 1.248v load 1.256 that was on cpu z. now on ai suite2 there was a slight difference in voltage by +0.006 not sure which is more accurate my temps also didn't go over 51 c that reading was from ai suite 2 aswell.

wazza300 · 29 Nov 2013 at 11:15

is it still crashing?

browner0189 · 29 Nov 2013 at 11:35

wazza300 said:
is it still crashing?

nope haven't had one crash since I lowered the ram MHz to 1600

just went on task manager and my cpu is stuck on a 100% load.

ok I shut down the rig and now cpu usage has gone back to normal

wazza300 · 29 Nov 2013 at 12:19

I doubt you'd run 16gb at 2400mhz anyway on ivy

you might run 1800mhz or 2000mhz with some more cpu/vtt voltage

browner0189 · 29 Nov 2013 at 12:23

wazza300 said:
I doubt you'd run 16gb at 2400mhz anyway on ivy

you might run 1800mhz or 2000mhz with some more cpu/vtt voltage

I would be happy with 1866mhz if I could I read that you wont really benefit more than that on ivy. also would like to do a 4.5ghz cpu overclock. any ideas after running prime 95 my cpu usage stuck at 100%

wazza300 · 29 Nov 2013 at 12:27

it could have stuck? idk

but if you quit prime it should downclock itself again

you should be able to hit 4.5ghz and 1866mhz ram,EDIT you have asus board

try 1800mhz first with 1.10v cpu/vtt (not cpu voltage)
and try with +0.025v cpu offset

and set medium loadline calibration and manual pci/cpu clock of 100

browner0189 · 29 Nov 2013 at 12:47

wazza300 said:
it could have stuck? idk

but if you quit prime it should downclock itself again

you should be able to hit 4.5ghz and 1866mhz ram,EDIT you have asus board

try 1800mhz first with 1.10v cpu/vtt (not cpu voltage)
and try with +0.025v cpu offset

and set medium loadline calibration and manual pci/cpu clock of 100

ok went to the bios and cant find vtt didn't you say it could be called vccio? if so that set to 1.10v already