How does my system stand?

Hanuki · 14 Oct 2011 at 19:56

How does it look?
Antec High Current Gamer 620W '80 Plus Bronze' Power Supply
Corsair XMS3 4GB (2x2GB) DDR3 PC3-12800C9 1600MHz

[/URL][/IMG]

does anything look wrong?

Ginger-Menace · 14 Oct 2011 at 19:59

the 12v rail is at 9?

Hanuki · 14 Oct 2011 at 20:12

Hey i am a noob! -_- how can i amend that? this hasn't been over-clocked or nothing!

Hanuki · 14 Oct 2011 at 20:12

This is my first ever build in my hole-entire life XD

Rik1254 · 14 Oct 2011 at 20:18

Apart from the 12v coming out as 9v (mights be a hwmonitor issue), Id be a bit concerned with the temps considering the fans are at 100%, unless your on a stock cooler?

Hanuki · 14 Oct 2011 at 20:24

Rik1254 said:
Apart from the 12v coming out as 9v (mights be a hwmonitor issue), Id be a bit concerned with the temps considering the fans are at 100%, unless your on a stock cooler?

Im using fan cooling, and the A50 heatsink.

Hanuki · 14 Oct 2011 at 20:25

Also my RAM is only giving out a DRAM frequency of 798.3MHz -_- URGH!

Rik1254 · 14 Oct 2011 at 20:26

Well on a 2500k OC'd to 4.6, I get idle/ web browsing/ playback temps for 28 on a similar cooler, but idle temps dont matter anyway, Im just a perfectionist that likes ultra cool stuff.

Id definately find out the cause of the 12v rail issue.

Jordan97 · 14 Oct 2011 at 20:26

How does my system stand?

With its feet...

Hanuki · 14 Oct 2011 at 20:26

that stats were not taken IDLE FYI i am downloading, and was watching videos so...

Rik1254 · 14 Oct 2011 at 20:26

Hanuki said:
Also my RAM is only giving out a DRAM frequency of 798.3MHz -_- URGH!

You have 1866 (or whatever) RAM?

EDIT: scratch that, it would be 1600mhz *slaps face*

Hanuki · 14 Oct 2011 at 20:28

Rik1254 said:
Id definately find out the cause of the 12v rail issue.

Yeah little worried know, i dont have a volt metre to test my equipment... any suggestions

Hanuki · 14 Oct 2011 at 20:29

http://www.overclockers.co.uk/showproduct.php?prodid=MY-203-CS

Rik1254 · 14 Oct 2011 at 20:30

I take it your monitoring it through CPU-z?
If so, it only reads half the rated speed.

Hanuki · 14 Oct 2011 at 20:31

Rik1254 said:
I take it your monitoring it through CPU-z?
If so, it only reads half the rated speed.

Oh, okay i am little shaken with this know i should have done more research

Scotteh · 14 Oct 2011 at 20:32

if dram freq is 798.3 then you're at 1596.6Mhz which is fine

Rik1254 · 14 Oct 2011 at 20:34

Hanuki said:
Oh, okay i am little shaken with this know i should have done more research

Nah its fine. If I were you though, Id take a screen shot of HW-monitor now and each time you turn the computer on for say 3 days. If you 12v doesnt change much or gets worse, contact the supplier (assuming its under 30 days old) otherwise contact antec.

Hanuki · 14 Oct 2011 at 20:34

I may check the voltage through my BIO's hopefully give me a more insightful reading...

Jordan97 · 14 Oct 2011 at 20:35

Memory reading is fine.

DDR stands for Double Data Rate, meaning the frequency will actually be double.

Hanuki · 14 Oct 2011 at 20:36

Yea i have my boxing and invoice reciepts - urgh that means i have to take out all the power supplies....

man i love building computers.