How long does your PC take to SuperPI 1M !!!!!!

silversurfer · 29 Sep 2006 at 23:39

Devious said:
mem running 4:3

Hopefully beat this tomorrow when i install my P5W Pro mobo and some 1:1 or maybe 4:5.

So your using 975 chipset to run the memory 344mhz there ?

s754 sempron @ 9 x 225 takes 48 seconds

rig in my sig crashed it.

Mud · 29 Sep 2006 at 23:47

(For comparitive purposes) 37secs on a 1.6GHz Conroe laptop, 40secs on a stock 4600+ with poor RAM.

marscay · 29 Sep 2006 at 23:51

=assassin= said:
:O Are you running some expensive liquid nitrogen cooling system then??!!! That's a mega OC for an A64!

just a modded vapochill LS

i think i could get this chip even higher with a stock LS but my unit is just too cold for it and it coldbugs like crazy at this point ...look at the voltage :mad:

it can prime 24/7 @ 3500 with 1.5v

Devious · 30 Sep 2006 at 00:40

silversurfer said:
So your using 975 chipset to run the memory 344mhz there ?

Yeah, the Asus P5W DH wont run 1:1 + mem divider above around 430ish FSB.

Hopefully my new board will run 1:1 at 466 +

silversurfer · 30 Sep 2006 at 01:20

I just thought it was usefull to be able to run lower speed ram if nessecery, theres not a lot of info on it. 965 can only do 1:1 or less

celliott · 30 Sep 2006 at 01:30

28sec for spec in sig.

Phil2008 · 30 Sep 2006 at 01:44

31secs [email protected]

wizardmaxx · 30 Sep 2006 at 05:39

My time using my mspaint superpi supercelly mod

Jimbo · 30 Sep 2006 at 10:29

Is that a wind up? 11 seconds with a celeron? am I missing something here?

JeffyB · 30 Sep 2006 at 10:39

Heres mine 27.9s

Hawk Tuah · 30 Sep 2006 at 10:54

Jimbo said:
Is that a wind up? 11 seconds with a celeron? am I missing something here?

I think seeing as loop 1 takes 3 seconds and loop 2 is done in under a second, and he mentions Mspaint, it would be slightly obvious.

Jimbo · 30 Sep 2006 at 11:21

Thats what I thought, so whats the point in posting that? we can all use mspaint. :rolleyes:

wizardmaxx · 30 Sep 2006 at 12:21

Just a bit of fun Jimbo - 20 to 6 in the morning and nothing to do.

Jimbo · 30 Sep 2006 at 15:32

Ok mate I forgive you.

Mul · 30 Sep 2006 at 20:53

~29 seconds, specs in sig.

Mul

OC_A64 · 30 Sep 2006 at 21:21

Updated from the last run....

ReeceKB · 30 Sep 2006 at 21:38

OC_A64 said:
Updated from the last run....

Sorry to be off topic but i'm gona get a new hard drive and i see you have Windows 2000 shall I install windows 2000 instead off XP but whats the difference.

Thanks

OC_A64 · 30 Sep 2006 at 21:46

rkb442 said:
Sorry to be off topic but i'm gona get a new hard drive and i see you have Windows 2000 shall I install windows 2000 instead off XP but whats the difference.

Thanks

It's windows XP (check the start bar icon) just adjusted to best performance

Angilion · 30 Sep 2006 at 21:49

mattbrown91 said:
Just for an old comparison my a64 3000 at 2.7GHz(300*9) does it in 34.375s

Hmm...what are you cooling that with? A 50% overclock is a hell of a lot for it.

Mine's at 2.35 (9*260) and I want to push it more if only I could fix the problem with my HDD only being detected if my PC is off for at least 10 minutes before being powered up (i.e. rebooting is impossible, which makes overclocking not much fun).

38.574 for mine, though it was 38.046 with the CPU at 2.26GHz. My new memory timings are slacker than the elastic on 5 year old underpants (3-3-3-7-10-16). Something else to fiddle with if I can get the reboot issue fixed.

MoD_Callidus · 30 Sep 2006 at 22:03

XP2700+ @ stock

2171.6 Mhz
13 x 166
Soltek Qbic sff

*cough*

Pi 1M in 53 sec's :mad: