How to optimally configure Ryzen 3000 Series CPUs

[opethdisciple]

There is also a community plan V4 that I'm using with 1.0.0.4B bios, I'm using 142 95 140 with PBO kept til Auto with the 200MHZ auto boost and x5 Scalar.

Temps are lower than ever at 77c

With 2 cores boosting to 4.375mhz

OK, cool. Well I am running what you listed above:

PPT: 142
TDC: 95
EDC: 140
Scalar 5x

Any they give me consistent results over 100 flops in Intel burn test so I am happy.

However my best results have come form these settings:

PPT: 300
TDC: 230
EDC: 10
Scalar 5x

The difference with these settings is about 120 points in cinebench.

But I am not happy seeing temps as high as 80c and not happy using values for EDC so low.

 

[Kevin Matthews]

OK, cool. Well I am running what you listed above:

PPT: 142
TDC: 95
EDC: 140
Scalar 5x

Any they give me consistent results over 100 flops in Intel burn test so I am happy.

However my best results have come form these settings:

PPT: 300
TDC: 230
EDC: 10
Scalar 5x

The difference with these settings is about 120 points in cinebench.

But I am not happy seeing temps as high as 80c and not happy using values for EDC so low.

It's all down to silicon lottery, did you try the power plan also

https://cdn.discordapp.com/attachments/612647199737774104/669860910659141672/Powerplan_V4.rar

If running latest bios. Also I've my ram overclock to 3800mhz

 

[opethdisciple]

It's all down to silicon lottery, did you try the power plan also

https://cdn.discordapp.com/attachments/612647199737774104/669860910659141672/Powerplan_V4.rar

If running latest bios. Also I've my ram overclock to 3800mhz

Nah haven't tried the power plan.

Is the scalar at 5x not too aggressive?

 

[megatron]

I installed that power plan, I ran a single & dual core Cinebench R20 and was getting 4.5Ghz. Think I need to read this to comment:
https://www.techpowerup.com/review/1usmus-power-plan-for-amd-ryzen-new-developments/