How to over volt a Titan, a 780Ti or a 780 guide

[Gregster]

Well using 50% fan speed and then run the render test on GPU-Z wait 5 minutes for it to settle and then jumped up the volts and the temps did indeed rise, so it would appear to be working, down side tho could not get past my best overclock on stock volts which was plus 130 on the core, so im guessing that hitting my limit on the GPU, still it was worth a try, thank you

Did you use the Gigabyte BIOS or is yours the reference WF model? In truth, I would be cautious of doing the mod on air cooling and if under water, I guarantee you will get higher clocks with 1.3V at your disposal.

 

[Gregster]

Ahhh ok. I have included a BIOS for the WF also in the op but it does come with risks. I don't blame anyone for not doing the mod , as the gains are minimal in games but can be noticeable in benching.

 

[Gregster]

It always gives that warning and WhyScotty has confirmed it is the same BIOS he uses Alex

 

[Gregster]

Sweet, cheers Greg. Flashing time!

No probs. I have to go to work soon but if you run into any issues or get stuck with anything, lemme know. We are not that busy on nights.

 

[Gregster]

No probs

 

[Gregster]

I flashed the skynet 780 classi bios without any issues but when I try to enable to MSI AB hack for 1.3V, both the 3:20h and 4:20h lines return an invalid result. Does this mean my card can't be overvolted?

What AB version are you using Alex?

 

[Gregster]

You don't use the hack on the Classys

Thanks Neil.

I supplied the Classy voltage tool in the OP

Is that all that is needed Neil?

 

[Gregster]

Aye

So if using an EVbot as well, this allows for even higher voltages I have read but does the Zawarudo tool work the same?

 

[Gregster]

Thanks Greg and scotty. So I just need to use Zawarudo's tool?

Edit - I am using the AB version in the 780 folder on your skydrive Greg.

Not sure Alex and think you will need the Classy voltage tool to raise volts but I expect the Zawarudo tool won't work.....

Neil will confirm.

 

[Gregster]

No probs and sadly, I have no experience of it, so I can't help there I am sure you will be fine though

 

[Gregster]

Awesome post thx Greg I've been looking for a guide like this just need EVGA to release a bios

Glad to help

*cough*Skyn3t*cough*

 

[Gregster]

I will add something to the OP about the Classy voltage tool at the weekend, so any and all info would be appreciated I love a bit of plagiarism

 

[Gregster]

Do you have a copy of the tool?

Yer, I will have a look at it tomorrow. I have it linked in the OP.

 

[Gregster]

You have to use the Classy voltage tool and Afterburner/GPU-Z gives false readings sadly.

 

[Gregster]

Hey greg, I gave this a go on my reference EVGA 780Ti but was unable to change my voltage from 1.075v. The slider would go up and down but nothing would change.
Any ideas mate?

When you say the slider would go up and down, what is it showing if you move it to the right?

 

[Gregster]

I am confused, as users are reporting it works with the 780Ti but as I don't have one I can't confirm.

 

[Gregster]

There's no reason it shouldn't, it uses the same ncp4206 controller as the 690/780/titan...

That's how I see it but if it is done at a hardware level, gawd knows.

 

[Gregster]

It doesnt work, what you find is lots of people that say it does work and that Ab and Gpu-z just dont report the voltage correctly which isn't correct, they report the voltage just fine its just the voltage slider does nothing, with precision x and skynets bios you can overvolt to 1.212.

Ahhh that sucks then. I will have to add something to the OP when I have finished work.

 

[Gregster]

I think that is your lot Alex without getting a EVbot

 

[Gregster]

Ahhhh sweet news for you Classy owners then