How to setup RAID 0 on Z77X-UD4H

WuMyster · 14 Jun 2013 at 10:03

Ive looked around for about 24 hours now and I cant find anything for this board.
Does anyone know how to setup RAID on this? Im running a 2TB Hitachi for OS and games and will want to run two of my 640GB HDDs for recording.
Waiting for my next payment for the Sammy 840 pro.

DaleTheWhale · 14 Jun 2013 at 10:09

Do you still have the manual that came with the board, they normally have a little guide on what to do.

WuMyster · 14 Jun 2013 at 10:18

They do but it is shocking. Tells me to enable RAID in the BIOS which ive done and then the RAID controller will come up and I should press Ctrl + I. It doesnt even come up and proceeds to boot with windows.

DaleTheWhale · 14 Jun 2013 at 10:38

It boots into windows with it set as RAID? It normally breaks and asks for an OS when I did it on my Asrock board.

Spam Ctrl + I when it's going through BOOT. Might be a really fast menu that barely pops up.

WuMyster · 14 Jun 2013 at 10:44

Yep, boots into windows with RAID set.
Tried spamming as well to no avail.

WuMyster · 14 Jun 2013 at 14:13

Anyone?

WuMyster · 14 Jun 2013 at 14:13

Could the admin/mod move this to the motherboard section please? I reckon ill get more responses there!

Clav · 14 Jun 2013 at 14:44

There is the Intel storage controller and the Marvell storage controller. Make sure you have your drives plugged into the ports you have set to RAID. Not sure what else it could be, the manual isn't terrible that is literally all there should be to it.

WuMyster · 14 Jun 2013 at 14:47

Intel RAID is enabled and plugged into the correct ports.

Bobmunkhouse · 15 Jun 2013 at 12:52

Hmmm only time I had this it not coming up with Ctrl -l was because the disks were plugged into wrong ports...have you only 2 disks attached?

WuMyster · 15 Jun 2013 at 12:59

I have my 2TB OS disk in Port 0 and the two 640GB drives in port 3 & 4. All on the Intel controller.