**** i push it, push it some more?

Cyber-Mav · 23 Apr 2006 at 22:17

Alex_T said:
cool cool.... my mobo does go up to 412fsb will drop down to a gig n give it a go tomorrow

whoa thats a lot of speed there. your setup should end up faster than what i got. :eek:

Drazic · 24 Apr 2006 at 09:34

It's an Asus P4C800E-deleux...corse it can do it, does over 400fsb and then there are mods ontop

Getting a P4 2.4 prescott hopefully (not many around) to freeze and run 1:1 and clock the nuts out of it to sow that FSB makes things fast

m3csl2004 · 24 Apr 2006 at 14:11

Drazic said:
It's an Asus P4C800E-deleux...corse it can do it, does over 400fsb and then there are mods ontop

Getting a P4 2.4 prescott hopefully (not many around) to freeze and run 1:1 and clock the nuts out of it to sow that FSB makes things fast

i gurantee no 875/865 board can do 400 (edit most hit the limit ~270)

Alex_T · 24 Apr 2006 at 16:10

ummmm my ~Gf has a 2.4Prescott

478 socket too

Drazic · 24 Apr 2006 at 16:20

Ooo Alex can i have it (the cpu not ya g/f)

Dude the Abit IC7-MAX3 wasn't even ment to do it yet it did!

My mobo has done over 300 FSB already, so it'll do more and there are mods too do so

m3csl2004 · 24 Apr 2006 at 16:37

yeah im aware that a well modded ic7 can do well into the 300's, as can a p4c, i have NEVER seen any do 400, i mean, even the most modern chipsets are only just reaching this

my board (an 865 gigabyte) tops out around 265 without mods

carefull the 2.4 isnt a 533

Drazic · 24 Apr 2006 at 16:52

I can run 533 on the bord, wont be as good as 800 HT but cheers for the heads up anyways

Yeah theres a few about on xs recently poping up

Abit or Asus only 2 mobos to have 478 if you want to clock anyhting eles is no good honestly

Alex_T · 24 Apr 2006 at 18:07

well im up to 3.31ghz on FSB 237 n seems ok.... might prime95 see if it died, probably will

Alex_T · 24 Apr 2006 at 18:10

hehe aww well, prime95 died after 1 min :S wonder if it is the ram then?? CPU voltage on 1.413 FSB on 237 and ram ratio on 5:4

Drazic · 24 Apr 2006 at 18:15

Dude send me your rig i'll sort for you

Alex_T · 24 Apr 2006 at 18:35

LoL, well i got up to FSB250mhz and was at 3.5ghz, n just shut down when i tried to open photoshop

ahh well thank god it reset its self.. cool thing is i can run at just under 3.3 on HSF(92mm on hyper4 HS) and only at 48C

defiantly new ram time..

OCZ or Geil?? (need DDR400 2x512)

Drazic · 24 Apr 2006 at 18:54

I got some OCZ you could buy

Let me know via trust if ya want and about ya misis p4 2.4 prescot

m3csl2004 · 24 Apr 2006 at 18:57

the 533 comment was meant for the 18x multiplyer, meaning that its basically the same as a 3.2 chip ie not as good for high fsbs

Alex_T · 24 Apr 2006 at 19:15

np, will see what FSB it is cos cant remember off the top of my head, sure it was a 800...
msn me on [email protected] about the ram too

will see what can afford, n stuff n if all good will sort it all out wit ya.

oww got up to 3.512ghz (FSB250.9 n bus-speed of 1003.6

but died on me after about 15 min of messing in PS-CS2