IC-Diamond GIVEAWAY Thread!

WHAT the 32 samples of ICD sent out today look like:)

DSCF7486_zps7748b3d1.jpg
 
OCZxFTW said:
Still haven't received mine :(
Click to expand...

Same here mate, it's soon a month I'm waiting and sent a trust message, emailed the yahoo email in trust and sent email to the email address on their site too. I have a feeling Royal Mail is stopping them because they may look like a syringe in an envelope.. God knows what's going on. I'm in Leeds same city as Frost and have not got mine and no confirmations if they even got my emails or trust messages.

About to give up waiting and just go buy some thermal paste or reapply some MX4 to put the system back together again, I did do the MX4 temp tests and was only waiting to do the ICD tests and was going to re-paste a friends GTX 680 as a test too. All sat here waiting to be done for over soon 3 weeks. :rolleyes: Waiting till Saturday then I give up. Will just reapply MX4.

A shame I took part last time with the ICD tests and I ended up again purchasing the ICD to add my results because the give away was over. I did the AS5 to ICD tests then.
 
Last edited:
Purgatory said:
Same here mate, it's soon a month I'm waiting and sent a trust message, emailed the yahoo email in trust and sent email to the email address on their site too. I have a feeling Royal Mail is stopping them because they may look like a syringe in an envelope.. God knows what's going on. I'm in Leeds same city as Frost and have not got mine and no confirmations if they even got my emails or trust messages.

About to give up waiting and just go buy some thermal paste or reapply some MX4 to put the system back together again, I did do the MX4 temp tests and was only waiting to do the ICD tests and was going to re-paste a friends GTX 680 as a test too. All sat here waiting to be done for over soon 3 weeks. :rolleyes: Waiting till Saturday then I give up. Will just reapply MX4.

A shame I took part last time with the ICD tests and I ended up again purchasing the ICD to add my results because the give away was over. I did the AS5 to ICD tests then.
Click to expand...

hey fella, as i have said twice. WHY NOT just pop around to my HOUSE? and collect the tubes?
 
Right Purgatory i send all tubes in the EXACT order i received the trust message.

65 TUBES have been sent out in ORDER and your name isnt on them buddy.

I will take t he time and PASTE the username of EVERYONE whom has been sent a t ube thus far!
 
Purgatory said:
Same here mate, it's soon a month I'm waiting and sent a trust message, emailed the yahoo email in trust and sent email to the email address on their site too. I have a feeling Royal Mail is stopping them because they may look like a syringe in an envelope.. God knows what's going on. I'm in Leeds same city as Frost and have not got mine and no confirmations if they even got my emails or trust messages.

WHAT FOLLOWS: are a list of usernames that we have sent a tube off to:) After that will be PROOF of posting ergo the second class stamps used to pay for postage:0

GiraffePencils,
Adam_101
YarwoodUK
Dave1240
Idleman
LtMatt
RavenXXX2
MOOGLEYS
Atari,
valkynaz
infernox
picnic,
dacads
Roverno
JasonM
tommybhoy
russell664
Antelopethy
Psypher5
phil_c
Rooster212
Danny091
R.C.Anderson
joeyssc
Hoodleader,
JediFragger
JOSH86,
darket
Confused Stu
Drangueos
Anonymous_0172
Avathar77,
leoncao
Resident
topdog555,
TOL247
Gregster
Ceryndrion,
a03dugga
Mark A,
shadow_boxer
shadowscotland
Fulax,
pob9,
mushtafa,
Clairvoyant
j.col,
Brett82,
Blackwhite,
OCZxFTW
Vinny1511
neologan
Mr Badger
[ZiiP]carrot,
Damo667,
SieB,
Exoon,
Bluecube,
samtara,
imginy,
Frozennova
scorchedbee
acme15
varkanoid,
mzal

DSCF7491_zps5b462bb2.jpg


and

DSCF7490_zpsd945637a.jpg


I cannot find the receipt for the 11 sent:) however as you can plainly see that the TUBES HAVE been sent!

Other than posting FIRST CLASS RECORDED delivery (of which costs will be prohibitive) for each sample then I am at a loss really.

NOTE ALL samples have been sent at the time when I received the message in my inbox via my email. Which may not be the order they appear on here.

cheers

Frost Dragon
Click to expand...
 
Last edited:
Woo hoo! On the list! :)

I can continue looking forward to the post every day and awaiting my free gift and excuse to play with my hardware!

Thanks for taking the time to post the list of usernames Frosty, it's appreciated.
 
On the list - excellent :D I'm at my parents' this week, but once I'm back home I'll get testing.
 
PLEASE READ THOROUGHLY BEFORE TESTING/POSTING YOUR IC DIAMOND TEST RESULTS!!!



PLEASE ONLY POST WITH RESULTS WHEN YOU HAVE FULL RESULTS, OTHERWISE YOUR
POST MAY NOT BE SEEN BY ALL IF YOU RESERVE THE POST FOR LATER RESULTS
WITH IC7. PEOPLE TEND TO GO TO THE NEWEST POST, SO IF YOU WANT IT TO BE
SEEN BY ALL, POST YOUR RESULTS ONCE YOU HAVE THEM ALL. ALL OTHER
DISCUSSION/SUPPORT POSTS, GO RIGHT AHEAD!!

PLEASE BE SURE TO BENCHMARK YOUR CPU TEMPS WITH YOUR CURRENT TIM AND
RECORD YOUR RESULTS BEFORE USING IC7 FOR TESTING. WE NEED BEFORE AND
AFTER PLEASE!

ALSO, PLEASE MAKE SURE YOU DON'T CHANGE ANY VARIABLE OTHER THAN THE
THERMAL COMPOUND USED FOR BEFORE/AFTER (I.E. SAME VOLTS/CLOCKS, COOLER,
AND OTHER HARDWARE)


APPLICATION METHOD


For all those participating in the ICD/ giveaway, please follow this link to the Innovation Cooling website for more information on the products:

Innovation Cooling

Proper application is the key to this product. The nature and
consistency of this product is likely quite different from what most of
you are used to in a Thermal Compound. We don't
recommend use of traditional methods of applying the TIM like razor
blades, lines, Rice size, etc. ARE ALL Big BIG NO NO's. Through extensive end user testing, the best overall application method
has been determined to be a pea sized amount directly in the center of
the CPU. The TIM should be adequately spread via the down force of the
CPU cooler (a sufficient amount of down force will provide best results; minimum 50psi of down force should be the goal for optimum results.
please see the Innovation Cooling website for more info). Also, for
coolers/surfaces that have many peaks and valleys, it may be beneficial
to wet the surface(s) with a small amount of ICD/Perihelion to initially fill the voids in the mounting surfaces...then proceed with recommended application as usual. Please click on the link below for application
methodology and shoot me a PM if you have any questions.
Keep in mind, ICD/Perihelion has been formulated with the specific goals
of providing superb thermal conductivity with short set times, but also
for long term stability and performance without pump/bake out through
extended thermal cycling or usage. This stuff is very stable over long
periods of time.



Please do feel free to navigate through the whole Innovation Cooling
website as there is tonnes of information on there that might prove
beneficial.


HOW TO POST RESULTS


THE FORMAT IS AS FOLLOWS (ALL TEMPS IN C):

OPTIONAL INFO: PROCESSOR, VOLTS/CLOCKS, HEAT SINK/COOLING USED, ETC.

Before Compound:
Ambient Temp:
Idle Temp:
Load Temp:

ICD/Perihelion
Ambient Temp:
Idle Temp:
Load Temp:

Added 5/22 - Cure Time- Cure Time averages 2 hours in most situations
for sinks with adequate pressure loading with maybe .5C more overnight.
Lightly pressure loaded sinks may take a day or more depending on the
amount of pressure


If you have any problems or need support, please feel free to post here
for now. Remember, proper application and good even heat sink pressure
(goal should be minimum of 50psi or more) are crucial for peak performance. Too much or too little compound will impact your
results so please do visit the Innovation Cooling website for
Application Instructions with images and explanations. For those with
direct touch heatpipe coolers, you might want to try wetting the contact surface of the cooler with a tiny amount of ICD to fill any small voids before proceeding with the normal application method.

If anyone has any questions, please feel free to post up. .
 
Nothing yet but looks as if it's only just been sent out in the most recent batch. If you could pixalate or censor box the addresses of the forum members above that would be great. Full name and address has value in the scamming world :(
Thanks again for doing this. Just got a new CPU so can do two before and afters next week when the kids are back at school.
 
Last edited:
I'm on the list. Thank you frost dragon. I'll keep my eye on the post then get testing when it arrives. Would system info like cpu, gpu and waterblock manufacturer be of any use as well or are you just interested in temp difference between two different tims?
 
A member sent me one of their extra tubes on Thursday unfortunately nothing has yet arrived , wonder if RM have tightened their rules?
 
You must log in or register to reply here.
Back
Top Bottom