IC-Diamond GIVEAWAY Thread!

I used Frostdragons screen shot of the receipt as leverage, and managed to get mine free of charge. Frostdragon was quoted a price by the teller in the post office, therefore I deemed it their mistake and fortunately for me, so did the guy behind the counter - take it with you and give it ago, nothing to loose !
Click to expand...

Good advice

& obviously padded envelopes on future mailings
 
Last edited:
Got my tube! , currently just ran two quick tests It's a really warm day and I have an attic room , plus I don't normally game or bench at this time of day so temps are higher than normal. Currently have my CPU clocked @ 4.4ghz

Standard generic paste that came with the Antec 620, shows idle temps for the day (just browsing) and a round on BF4. Done around 1pm
237QrC6.jpg.png
normally it only hits 70c but that's in the evening

10Min prime95 run:
sVY6Keq.jpg.png

It will be interesting to see how the IC-Diamond 24ct performs.

Rad is cooled by 2x Gentle Typhoon 1850's at 1300rpm.

Was going to de-dust my PC when I changed the paste over but don't know how much that will mess with results?
 
Last edited:
murah said:
Got my tube! , currently just ran two quick tests It's a really warm day and I have an attic room , plus I don't normally game or bench at this time of day so temps are higher than normal. Currently have my CPU clocked @ 4.4ghz

Standard generic paste that came with the Antec 620, shows idle temps for the day (just browsing) and a round on BF4. Done around 1pm
237QrC6.jpg.png
normally it only hits 70c but that's in the evening

10Min prime95 run:
sVY6Keq.jpg.png

It will be interesting to see how the IC-Diamond 24ct performs.

Rad is cooled by 2x Gentle Typhoon 1850's at 1300rpm.

Was going to de-dust my PC when I changed the paste over but don't know how much that will mess with results?
Click to expand...

Hey folks

Next batch and possibly LAST ONES go out TOMORROW! I will send them ALL in padded envelopes this time (as someone said Royal MAUL=GRR) I can only apologise for the complete mess up with the office teller. THing is you are all getting them now and that is what counts!

I will post a photo of the next batch plus of the receipt also just in case!

Regarding above gentleman. YES dusting out your pc WILL invalidate your results..... ALL tests have to be duplicated please.


Kindest Regards

Frost Dragon
 
BriT said:
Did you get my trust i sent you?
Click to expand...


Hello there

If it is after the first 100 there will be nothing I can do I am afraid.

I wish we could extend it after the 100, however we feel that 100 free tubes PLUS a extra tube for those whom complete a test using a gpu or motherboard test is very generous as is.

So sorry:(

Regards

Christopher Cressey
 
just paid my £1.20 and got my tube, thank you

will apply to my h60/4670k and post before and after shots, will also apply to two 7970s in crossfire and post before and after from furmark

So a extra tube to test on my gpu? accepted!

"edit"

early indications are showing a +10 degree rise over stock h60 paste on idle? ill run prime for 1/2 hours to see if that helps it settle in as prime temps have dropped 9 degrees?

10 minutes in and prime 95 temp is virtually 10degrees less than before, will keep running then let pc settle to get idle, looking good though as thats a hefty saving from stock paste
 
Last edited:
Frost im going to give my PC a complete de-dust before changing paste and do a proper report, bought myself a cheap digital thermometer to measure ambient temps should be here by wednesday
 
results of 4570k on a h60 with stock paste

H4ysblh.png

i3-330m Sony vaio laptop
ATOsLoN.png

7970 Windforce 3x

Z79THlM.png

Some good looking results there, all dropped which is good!

*update* after leaving the furmark and prime running for a few hours this is the result! A HUGE 10 degree drop now on gpu and 4670k idle down to 28!! So this definatly looks like you need to leave it running hot for a while to let it set in.

7970
hvLFsVT.gif

4670k/H60
lQqdkGO.png
 
Last edited:
Frostdragon, when you post the next (last) batch, could you please confirm all the users who were in that batch?


Glad to see the paste is working well for some!!
 
your welcome, really enjoyed my day doing it! First time i've tested a product!

do i win a special prize haha.

great product though, was very suprised by the average of 10 degree difference!
 
scorchedbee said:
your welcome, really enjoyed my day doing it! First time i've tested a product!

do i win a special prize haha.

great product though, was very suprised by the average of 10 degree difference!
Click to expand...

great, as i mentioned before on a graphics card one needs to burn in the paste for four hours on full load before the paste is properly cured:)
 
Did my TIM today and have posted the results in the results thread.

Saw a 5C drop at idle and a 6C drop under load! Very impressed.

Thanks frostdragon!
 
Well looking at the results I keep seeing being posted it seems quite impressive, lots of people seem to be reporting 5-6 degree drop
 
I received a card from the postie and picked mine up today.
I've recorded my original temps, and replaced the TIM. Just running IBT to cure the paste before taking the new readings.
Thanks frostdragon
 
Picked mine up today,

Will be posting results either tonight or tomorrow of my laptop htpc and main gpu

Thanks again frostdragon:)
 
You must log in or register to reply here.
Back
Top Bottom