Intel or AMD ?

This never ends well · 19 Nov 2015 at 19:50

Disable c1e support, core c6 state and enable hpc mode.

humax · 19 Nov 2015 at 20:04

jamiehard1989 said:
Disable c1e support, core c6 state and enable hpc mode.

Okay done that. Going to download them programs now

humax · 19 Nov 2015 at 20:06

.

This never ends well · 19 Nov 2015 at 20:08

Ok and your cpu is @4ghz which is stock.

This never ends well · 19 Nov 2015 at 20:10

Ok did you set the LLC to medium and you should be able to get to 4.3 or so on stock volts.

humax · 19 Nov 2015 at 20:23

Yes LLC set to medium. This is only set at 4Ghz and its still getting hot after only a few mins

.

humax · 19 Nov 2015 at 20:30

Just turned cool & quiet back on as the temps on this board are a bit worrying

.

This never ends well · 19 Nov 2015 at 20:37

humax said:
Just turned cool & quiet back on as the temps on this board are a bit worrying

.

Motherboard is fine as its sittings at 22c, cpu is at 57c.

This never ends well · 19 Nov 2015 at 20:40

Post in the fx overclocking in the cpu section, so this does not keep getting bumped to the top.

humax · 19 Nov 2015 at 20:40

It went a little over 57c after i took the pic and that was only set at 4ghz

.

humax · 19 Nov 2015 at 20:43

I knew the AMD FX-8350 was a hot chip but this is ridiculous

.

This never ends well · 19 Nov 2015 at 20:50

humax said:
I knew the AMD FX-8350 was a hot chip but this is ridiculous

What thermal paste are you using and how is your fan setup.

humax · 19 Nov 2015 at 21:13

jamiehard1989 said:
What thermal paste are you using and how is your fan setup.

The thermal paste was Arctic Cooling. Pic of the fan setup

This never ends well · 19 Nov 2015 at 21:18

Try turning the fan speed up on the 212.

humax · 19 Nov 2015 at 21:21

Is that setting on the motherboard

.

This never ends well · 19 Nov 2015 at 21:26

Yeah.

humax · 19 Nov 2015 at 21:43

It was set to Normal. The other settings are Silent,Manual,Disabled. I just set the board back to how it was at stock and ran the test again. One of the cores hit 63. So running everything at stock this chip is still over heating

.

This never ends well · 19 Nov 2015 at 21:58

humax said:
It was set to Normal. The other settings are Silent,Manual,Disabled. I just set the board back to how it was at stock and ran the test again. One of the cores hit 63. So running everything at stock this chip is still over heating

.

You could set it to manual and try the volts to see whats not loud on the fan.

63c is fine, i taken my 8350 to 75c for a short time, try playing a game with a overlay to see your temps while gaming.

humax · 19 Nov 2015 at 22:04

A pic of the fan at full wack on idle. Temps have come down a bit

.

humax · 19 Nov 2015 at 22:06

jamiehard1989 said:
You could set it to manual and try the volts to see whats not loud on the fan.

63c is fine, i taken my 8350 to 75c for a short time, try playing a game with a overlay to see your temps while gaming.

Sorry i don't have a game to play as I'm not a gamer

.