• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Ivy Bridge Temperatures Could Be Linked To TIM Inside Integrated Heatspreader: Report

hyperst said:
I was testing my over clock the other day, passed ten runs on IBT, 3-4 hours prime blend, load up BF3 and 5 minutes in and pc has hard locked up on me, loaded up again and BF3 crash's my PC again.
Click to expand...

A full stability test on Prime95 takes 17 hours (i.e. one cycle). Custom blend with 90% RAM usage.

Sometimes prime doesn't crash or BSOD until 11+ hours in, when you're nearing a stable OC.

IBT is only really useful for testing max temps at certain voltages. Not really good for stability test in my opinion.
 
nickeverett said:
A full stability test on Prime95 takes 17 hours (i.e. one cycle). Custom blend with 90% RAM usage.

Sometimes prime doesn't crash or BSOD until 11+ hours in, when you're nearing a stable OC.

IBT is only really useful for testing max temps at certain voltages. Not really good for stability test in my opinion.
Click to expand...

true that
 
It's nakid. :D

ihsremoved.jpg


noihs.jpg


I'm not entirely convinced I've got good contact with my waterblock, I'll need to modify the mount to be sure.
 
I'll post the results in a little over 30 minutes!

Edit:
pillar.jpg


This is the problem I have with the mount, without the IHS the black plate is resting on the pillar so the pressure on the core might be less than ideal. What'll do is file out the hole in the black plate so it can sit further down the pillar and hopefully won't be supported it by it, but rather completely by the core.
 
You must log in or register to reply here.
Back
Top Bottom