Latest Opteron Clock

Hyper · 20 Feb 2006 at 15:04

Hello All
I thought i would have a go at trying to lower the volts on my opteron while keeping a good speed, I know this chip can hit 3ghz but the point of this test was to get the volts as low as possible while still stable.
Take a look at the outcome:

Click Here !

What do you guys think?

Sam

Otacon · 20 Feb 2006 at 15:30

Pretty sweet dude

What cooling you using?

Hyper · 20 Feb 2006 at 15:32

Arctic Cooling Freezer 64 (old style, nearly a year old

)

Agent WD40 · 20 Feb 2006 at 15:38

Not a bad clock at all, make sure it prime stable for 24 hours, that way you know it isn't going to fail on ya

Agent

TBirdUK · 20 Feb 2006 at 16:17

nice best I've seen on that lower voltage (mine wont do it)- should be able to push it little further with just a touch more 1.41v- mines on a freezer as well and sitting nice at 2900 (although RAMs on a pretty heavy divider as its naff!). tops out at 46 deg.

chex · 20 Feb 2006 at 21:05

good stuff

Dreadi · 20 Feb 2006 at 21:23

hmm may have to crank mine down, my 144 is at 1.44 but that was cus i wasnt really sure what to set it at so took a stab in the dark

ajgoodfellow · 20 Feb 2006 at 22:07

1.44V is fine

Dreadi · 20 Feb 2006 at 22:17

if you say so, if all appears well from my sp2004 testing i plan to push it further on the overclock so i may end up going higher anyway, hope not tho

Explicit · 20 Feb 2006 at 22:28

Sweet clock

trojan698 · 20 Feb 2006 at 22:30

Awesome, is this from the new batch of opterons?

Hyper · 20 Feb 2006 at 22:35

Its a Opteron 146 CABYE 0540FPAW

Dreadi · 20 Feb 2006 at 22:36

Agent WD40 said:
Not a bad clock at all, make sure it prime stable for 24 hours, that way you know it isn't going to fail on ya

Agent

when you say this, do you mean 24 blend test?

malccy · 21 Feb 2006 at 08:45

That stepping can do better than that i'm sure - will prob need just over 1.5 to get there but 3.0ghz should be possible.

chex · 21 Feb 2006 at 09:07

he's already hit 3 GHz

He's trying to maintain what he's got at the lowest possible voltage, if you check you'll se he's below stock

malccy · 21 Feb 2006 at 09:14

Sorry - just woke up.

Agent WD40 · 21 Feb 2006 at 09:17

Dreadi said:
when you say this, do you mean 24 blend test?

Yup, you want to set it to a blent test (lots of RAM tested) and then leave it for 24 hours and if its survived, your rock stable...

Agent :cool:

farooqm · 21 Feb 2006 at 16:22

Hey... thats the same stepping I've got

My 24/7 Settings, slightly lower clock - using 1.35v... but I know it can do more at the same volts

Forgot to take the screenies with Prime running ...

With OCCT Running

OCCT Done

Hyper · 21 Feb 2006 at 16:30

Nice one mate.
It seems these are one of the best steppings

farooqm · 21 Feb 2006 at 17:25

hyper7racer said:
Nice one mate.
It seems these are one of the best steppings

Have you tried putting the volts down to 1.35 yet ??? What are your temps like?