Loop

extrememachine · 22 Aug 2014 at 20:07

Damn right
In all seriousness, if there are any XL-ATX cases coming in the near future I can wait

Ploppy2k3 · 22 Aug 2014 at 20:07

sigh............

Uncle Petey · 22 Aug 2014 at 20:07

LOL
Well, most expensive doesn't always = Best or most suitable for your needs.

^JP^ · 22 Aug 2014 at 20:12

400+ quid for a case is CaseLabs territory in my opinion!

http://www.caselabs-store.com/pc-cases/

I went with the TH10A but they have loads of options perfect for watercooling if you want a premium case.

Forget the tj11 and look at them!

Uncle Petey · 22 Aug 2014 at 20:26

Yep. If I was happy to spend that much on a case, then Caselabs is where I'd go.

vsg28 · 22 Aug 2014 at 20:37

lol I am now imagining the OP going price high-low on the CaseLabs website and going with a TX10.

extrememachine · 22 Aug 2014 at 21:41

MAGNUM TH10A

This one's not bad

^JP^ · 22 Aug 2014 at 21:44

extrememachine said:
MAGNUM TH10A

This one's not bad

Good pick!

See the link in my signature, I have started a build log with one

extrememachine · 22 Aug 2014 at 21:51

Looks like a lot of work especially the larger cases.
How difficult or easy did you find it?

^JP^ · 22 Aug 2014 at 21:55

Very easy to put together if that is what you mean.

And working with it is so good because of the size.

extrememachine · 22 Aug 2014 at 21:56

Yh but it looks like the entire room of google servers.
Doesnt the vast size bother you?

^JP^ · 22 Aug 2014 at 21:58

It isn't that big, just like two cases next to each other and then a bit taller and longer, pretty much perfect for me.
If you want big check out vsg28s build here: http://forums.overclockers.co.uk/showthread.php?t=18601401

extrememachine · 22 Aug 2014 at 22:02

^JP^ said:
It isn't that big, just like two cases next to each other and then a bit taller and longer, pretty much perfect for me.
If you want big check out vsg28s build here: http://forums.overclockers.co.uk/showthread.php?t=18601401

ya total overkill. If I do go with one then I may choose the magnum.
How long did it take you to assemble?

^JP^ · 22 Aug 2014 at 22:04

About an hour but I took my time to make sure everything was perfect.

extrememachine · 22 Aug 2014 at 22:10

Hows this config?

Magnum th10a
Case Color: gunmetal/primer
* Form Factor:xl-atx
* Orientation:standard
* Left Door:xxl window
* Right Door:ventilated
* Top Cover:120mm extended
* Power and Reset Switch:standard power c
* I/O Panel:3.0
* PCI Backplate:hex mesh
* Flex-Bay Configuration:120.4 mount ventilated covers
* Upgrade Reservoir Mounting Plate? (XL-ATX ONLY):2 single mounts
* Included HDD Cage Type:flex bay 120x25mm fan
* Add a Flex-Bay HDD Cage (MAC-102)?3cages
* Add a Standard HDD Cage (MAC-101) ?3cages
Also have a 450mm Height reservoir, will that fit here?

Total: $996.95

^JP^ · 22 Aug 2014 at 22:22

extrememachine said:
Hows this config?

Magnum th10a
Case Color: gunmetal/primer Why primer? If you like gunmetal go full gunmetal?
* Form Factor:xl-atx
* Orientation:standard
* Left Door:xxl window
* Right Door:ventilated
* Top Cover:120mm extended Do you really need the massive top cover? Thick rads already fit inside the case.
* Power and Reset Switch:standard power c
* I/O Panel:3.0
* PCI Backplate:hex mesh
* Flex-Bay Configuration:120.4 mount ventilated covers You can already fit 4x 120.4 (480), one top and one bottom in each side, do you need another front mount where fan controller and optical drive go?
* Upgrade Reservoir Mounting Plate? (XL-ATX ONLY):2 single mounts
* Included HDD Cage Type:flex bay 120x25mm fan
* Add a Flex-Bay HDD Cage (MAC-102)?3cages a lot of cages
* Add a Standard HDD Cage (MAC-101) ?3cages a lot of cages

Total: 996.95

Some comments in quoted text.

This is how I ordered mine.

Case Color: Black
* Form Factor:xl-atx
* Orientation:standard
* Left Door:xxl window
* Right Door:solid
* Top Cover:standard height ventilated
* Power and Reset Switch:standard power
* I/O Panel:USB 3.0
* PCI Backplate:hex mesh
* Flex-Bay Configuration:Solid Covers
* Upgrade Reservoir Mounting Plate? (XL-ATX ONLY):2 single mounts
* Included HDD Cage Type:Standard
* Add a Flex-Bay HDD Cage (MAC-102): No
* Add a Standard HDD Cage (MAC-101): No

extrememachine · 22 Aug 2014 at 22:26

Will probably take your advice on the red text except I will need some cages

^JP^ · 22 Aug 2014 at 22:30

Cool, remember to email them for the international shipping quote before you try and checkout.

https://store-df4bb.mybigcommerce.com/international-shipping-charges/

You should do a build log when you get started, would be nice to see how you progress with everything.

extrememachine · 22 Aug 2014 at 22:52

^JP^ said:
Cool, remember to email them for the international shipping quote before you try and checkout.

https://store-df4bb.mybigcommerce.com/international-shipping-charges/

You should do a build log when you get started, would be nice to see how you progress with everything.

Yes I will.

thnx