MAJOR Superpi - Survey

Xez · 9 Nov 2006 at 20:49

Bass Junkie what cooler are you using out of interest?

BassJunkie · 9 Nov 2006 at 22:27

Thx Its_me

admittedly its a pretty cool night tonight so my temps are about 4c or so cooler than normally hehe...

The cooler I'm using Xez is the much hated Thermaltake Tower 112 so 3 bags of sugar on your CPU lol, it has 2 Smart case 2 fans to cool it.

When Priming my PC it does sound like a tank stuck in a ditch but gaming i can turn all my fans down to a medium setting or lower depending on the ambient temps and my CPU gets between 50 and 55c full load.

Pulse · 16 Nov 2006 at 23:51

a slight update from my last post ..

nothing like those conroe though

TI66ER · 17 Nov 2006 at 00:08

heres my [email protected](500fsb)@1.4vcore with ram at 1000mhz 1:1

vocch · 20 Nov 2006 at 22:30

Here's mine.

benktlottie · 21 Nov 2006 at 00:21

I had to have a go !

vocch · 21 Nov 2006 at 11:31

Oh sorry guys.....don't think i posted my pb in this thread with me old E6600...anyways got 13.578 in link below 5 post's down.

http://forums.overclockers.co.uk/showthread.php?p=8023130#post8023130

doctoe2260 · 6 Dec 2006 at 13:02

How much does Ram affect these SuperPi times? I ran a 1M test on my new A64 X2 4200 at got 42 secs!! Which is like, forever! BUT, I did only have 1 stick of a 2x 512Mb set installed cos the other was fried! Does the loss of dual bandwidth slow it down that much?

ghgh · 6 Dec 2006 at 13:58

Yeah, dual channel RAM does help a bit in super pi as there is more memory bandwidth, iirc I tested a 3500 @ 3.05GHz with one stick of RAM and it got 30 seconds 1mb and again with dual channel and it got 28.6 seconds.

robmac · 8 Dec 2006 at 13:57

not bad for an old 945 pentium...........least i hope its not bad.

Margaret · 9 Dec 2006 at 22:44

dheyworth1981 · 9 Dec 2006 at 23:10

Nicely fits in with the one above, 100mhz slower, 0.5s slower

SiD-P · 10 Dec 2006 at 00:17

Just waiting for my Core 2 QX & AC water kit to arrive, then I can aim for 10 & 9 secs

CarlD · 17 Dec 2006 at 21:55

I can get it as low as 11.9 seconds or something like that @ 4ghz.

But the volts i have to put through my e6600 is mad (1.65v) so i dont like to run @ 4ghz

http://img157.imageshack.us/my.php?image=piwp2.jpg

Devious · 18 Dec 2006 at 18:10

CarlD said:
I can get it as low as 11.9 seconds or something like that @ 4ghz.

But the volts i have to put through my e6600 is mad (1.65v) so i dont like to run @ 4ghz

http://img157.imageshack.us/my.php?image=piwp2.jpg

if your getting 13.2s @ 3.9ghz how could you get 11.9s with only another 100Mhz ?

IceShock · 20 Dec 2006 at 00:49

just as a odd comparison:

hp7909 · 20 Dec 2006 at 07:41

ADA4600DAA5BV

FSB 240MHz = 32.000s

sablabra · 20 Dec 2006 at 09:41

Striking back at the C2D ********

Old score, could probably do a bit better, but the cpu isn't very oc friendly... Btw, really bad mem sticks as well

IceShock · 20 Dec 2006 at 14:08

i dno how the.. your voltages are so low the last two posts. i have to have 1.515 volts to get it to even boot up to xp at 2.6ghz lol

sablabra · 20 Dec 2006 at 16:17

IceShock said:
i dno how the.. your voltages are so low the last two posts. i have to have 1.515 volts to get it to even boot up to xp at 2.6ghz lol

If you're talking about the old athlon xp cpus(socket A), stock Vcore is 1.65V... Btw, I used about 1.7V in last screenie