I just got a triplehead2go but sadly just about every mode bring out a "out of range" message on my LG W2246 monitors. It is running at 800x600 on 3 monitors at the moment but any higher then that and it says out of range or i just just a mad imange. Am i doing something wrong? thanks
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
matrox triplehead2go help
- Thread starter Bmwww
- Start date
Your monitors appear to have only VGA (D-Sub) connections.
Looking at the product page for the TripleHead2Go it states:
Presumably there's some way to get different than 800x600 on each monitor (i.e a 16:9 aspect ratio) but unfortunately it wouldn't appear that you're going to get anywhere near 1920x1080.
Looking at the product page for the TripleHead2Go it states:
Presumably there's some way to get different than 800x600 on each monitor (i.e a 16:9 aspect ratio) but unfortunately it wouldn't appear that you're going to get anywhere near 1920x1080.
According to this page
http://www.matrox.com/graphics/en/products/gxm/th2go/resolution/resolutions.html
they do support 1920x1080 (albeit at 50Hz).
I wouldn't know how to do that, but they do claim its possible.
http://www.matrox.com/graphics/en/products/gxm/th2go/resolution/resolutions.html
they do support 1920x1080 (albeit at 50Hz).
I wouldn't know how to do that, but they do claim its possible.
You have to read the small print.
5760 x 1080 New! (3 x 1920 x 1080) (notes 2 and 4)
Note 2: Resolution not supported with VGA displays.