lovely bit of work. It looks really good
-
Notice regarding image hosts and attachments. See here.
MiniFusion - *Sponsored* by Xtia and Bitspower
- Thread starter Jay85
- Start date
Sorry, i couldn't help myself
.Still not complete due to some issues with the mounting brackets so gonna have to wait a week or 2 before i can get this rolling. The enclosure is gorgeous though and so happy to have it in hand now.
Soldato
- Joined
- 13 Sep 2010
- Posts
- 3,057
Mmmm... Shiiny 
Mmmm... Shiiny
Its beautiful! Shame to paint it but that's up next. Just working out what im going to do about the mounting brackets.
I'm really tempted just to 3D print some and be done with it because technically i can get away with it.
Soldato
- Joined
- 13 Sep 2010
- Posts
- 3,057
Nooo don't paint it! I know the build concept kinda requires it but I think it would still look good with that part as bare metal!
There's machining marks on the panels even though its shiny so to get it fully shiny i would i need to polish it quite abit to get it perfectly flat.
Soldato
- Joined
- 13 Sep 2010
- Posts
- 3,057
I did notice the machining marks, but I'm quite keen on that sorta stuff (like clear coat bike frames where you can see the heat marks from welding!)
Last edited:
Yeah i quite like it too which is why im struggling to paint it
.Im getting some 3D printed brackets tomorrow so depending on how that goes i'll decide whether to paint or machine polish this to a shine.
We're so close to finally building this but yet so far lol.
Last edited:
Honestly I would rather paint it, I work with Aluminium every day so I'm sick of machining marks lol.
If you do go to polishing it then I can say that Autosol (and a LOT of work) is great for giving a chromed looking finish.
Fantastic design once again, cant wait to see it all assembled.
If you do go to polishing it then I can say that Autosol (and a LOT of work) is great for giving a chromed looking finish.
Fantastic design once again, cant wait to see it all assembled.
It's not my build and therefore you must do what you want, particularly as your work is stunning. But:
Nooo don't paint it! I know the build concept kinda requires it but I think it would still look good with that part as bare metal!
Last edited:
Its gone in for powdercoating today, soo excited to see how this comes out. Should get it back sometime before the end of the week then i can crack on with the final build.
It's not my build and therefore you must do what you want, particularly as your work is stunning. But:
Nooo don't paint it! I know the build concept kinda requires it but I think it would still look good with that part as bare metal!
sorry to disappoint but its gone in for paint today lol, i was hmmíng and awwing it for ages and finally decided just to go for it.Here's a quick pic of it in bare metal with it assembled to the top case though and sorry to disappoint lol.
https://i.~ibb.co~/R7G1484/image0.jpg
Last edited:
Stunning work as usual.
Here's a quick pic of it in bare metal with it assembled to the top case though and sorry to disappoint lol.
https://i.~ibb.co~/R7G1484/image0.jpg
Is your site down just now?
Last edited:
Thanks BeeP!
Should have another update by the end of the week.
Edit: Yeah was having some server issues but all back up and running now.
Last edited:
Soldato
- Joined
- 21 Dec 2019
- Posts
- 8,625
- Location
- Planet Thanet
Though it looks great unpainted
Have to agree
After Seeing it attached painted should look better
Probably easier to photograph too
Without reflections
@BeeP His minibotpc site?
Working here
Have to agree
After Seeing it attached painted should look better
Probably easier to photograph too
Without reflections
@BeeP His minibotpc site?
Working here
looks good mate. The finish on the enclosure is really nice. I see the mayhem in the background
Here's a quick pic of it in bare metal with it assembled to the top case though and sorry to disappoint lol.
https://i.~ibb.co~/R7G1484/image0.jpg
The reflections are a nightmare to photograph even with a polariser. I kinda managed it but not quite perfect, you get the idea though
.Server was briefly down for the website but its back up now. Just in the process of updating things.
looks good mate. The finish on the enclosure is really nice. I see the mayhem in the background
Good spot, got a whole bunch of mayhems coolant and other bits to get through but should have that done soonish. I need to start looking at a rack to sort things out, i'm starting to lose track of things i've been sent.
Here we go!
Getting the build started tonight, lining up all my watercooling components next on the to do list. Might or might not need to 3D print some brackets for mounting watercooling components but i might be able to get away with it from experience.
https://i.~ibb.co~/T4Ctq2r/DSC-7102.jpg https://i.~ibb.co~/fG6vfY4/DSC-7107.jpg
Getting the build started tonight, lining up all my watercooling components next on the to do list. Might or might not need to 3D print some brackets for mounting watercooling components but i might be able to get away with it from experience.
https://i.~ibb.co~/T4Ctq2r/DSC-7102.jpg https://i.~ibb.co~/fG6vfY4/DSC-7107.jpg
Last edited: