MY FIRST OVERCLOCK!!

You can upload images to imageshack.us for use on the forums.

Surround the file name they give you with
tags and you're good to go.
 
its a foxconn mobo [EDIT] {975X7AB-8EKRS2H} im scared to got higher atm! got a few driver instabilitys so once its all sorted ill get it up to like 3Ghz

link:-http://www.foxconnchannel.com/EN-GB/product/motherboard_detail.aspx?ID=en-tt0000166
 
Last edited:
1stoverclock.jpg
hope this works :confused: yay it works well this is my overclock anything wrong there or do i just keep cranking up the fsb
 
Last edited:
Put your fsb straight to 334. I have yet to see an E6600 that couldn't do 3 gig on stock vcore.

**Edit** just realised you have a foxconn - better take your time then ;)
 
PinkFloyd said:
Welcome to the world of overclocking.

Everyone has to start somewhere :)
Click to expand...
i want to over clock, but my p4 chip is frm a dell pc.. will it still be ok to do it to about 3ghz.. from 2.8ghz??
 
ChoÞÞer said:
i want to over clock, but my p4 chip is frm a dell pc.. will it still be ok to do it to about 3ghz.. from 2.8ghz??
Click to expand...

best check the cooling, thermal compound and what the bios allows you to do

MW
 
Mr-White said:
best check the cooling, thermal compound and what the bios allows you to do

MW
Click to expand...
well i just got a new pc... and had to get a new intel heatsink
screnny.jpg
thats cooling


EDIT: new pc as in... just build 1... new motherboard and that :)
 
That CPU can get up to anywhere between 3.6 and 4Ghz on air with a decent mobo. Just watch out for your memory if you're still using the stuff from your Dell board. Mine is made by Hyundai :confused:
 
am useing dell hard drive, dell chip, dell cd rw :p



EDIT: board is... ASrock 775i65g and it says untied overclocking and stuff about FSB
 
Ah well I don't know much about that particular board but my Asrock DUAL-VSTA can't get higher then 300 while remaining reasonably stable unless you resort to volt mods.

But with a multiplier of 14 you really don't need that high a FSB. Try cranking it up to 250 and see if it boots ;)

If that works then take it up in stages of 10 to see where it stops becoming stable.
 
Cyber-Mav said:
thats pretty pathetic even for a first timer
Click to expand...

did your mother never tell you if you haven't got anything nice to say.. don't say anything at all?

If not, consider yourself told.. now shoo child... shoo
 
You must log in or register to reply here.
Back
Top Bottom