my first overclocking attempt

iBot · 8 Oct 2006 at 02:52

http://www.dfi-street.com/forum/showpost.php?p=203167&postcount=3

I have an ultra d and was following that post..

I'm at the point where I have my ram on a devider and i'm trying to find my max cpu speed.

I did a superpi 32mb and that went well.

I ran sp2004 for 3hrs40 minutes and that didnt have any problems.

So at the moment i'm happy with my 300mhz overclock.

What I want to know is whats wrong with dividers?

Is my pc acutally any faster with 300mhz overclock and my 100mhz(1/02) devider?

specs
DFI Lanpart UT NF4 Ultra-D 23/6/2005 bios
Athlon64 3200+ Winchester
2x512 Geil Vaule PC3200
250GB Seagate Baracuda SataII
Enermax 485w Noisetaker

barrymacp · 8 Oct 2006 at 12:09

Looks good m8

ReeceKB · 8 Oct 2006 at 12:21

Yea I followed that guide a when I got my Ultra-D 2 days ago. Realy happy with the board

Rob43 · 8 Oct 2006 at 12:23

Good work mate

Now see if you can get a bit more

Try FSB @ 250
Multi x 10
HTT x4
Ram on 166 divider
Cpu volts @ 1.5v,may have to fiddle a bit to get the right vcore though,may need less or more

Rob

iBot · 8 Oct 2006 at 13:02

will my cheapo ram do that rob?

Zefan · 8 Oct 2006 at 13:03

On a divider yes. The ram runs slower than the cpu, which doesn't actually affect performance much at all

Hamoodii · 8 Oct 2006 at 13:22

Not bad could do with a bit more vcore

iBot · 8 Oct 2006 at 13:32

why more volts? How much can these winnies take?

Rob43 · 8 Oct 2006 at 15:10

Hamoodii said:
Not bad could do with a bit more vcore

Why does he need more volts,if its stable :confused:

That would be pointless

Rob

Bailey_sufc · 8 Oct 2006 at 15:22

i agree with rob43 y change something that works

Rob43 · 8 Oct 2006 at 16:04

iBot said:
How much can these winnies take?

Depends on your cooling mate

What kind of temps are you getting at the moment ?

I personally would'nt be using any more than 1.55v under decent air though

Rob