Need help with my first loop in a evolv X

Associate
OP
Joined
23 Feb 2019
Posts
7
Buying from the states seems like a lot of hassle/expense for an extra 150W capacity over a 360GTS rated at 1200w
That why I used a XSPC EX420 for the front and a Black Ice Nemesis GTS 280mm X-Flow for the top
Importing the Black Ice Nemesis LS 420 from the US to France was expensive and if any trouble with the rad the RMA would have been a big pain
 
Associate
OP
Joined
23 Feb 2019
Posts
7
Finaly finish my loop
Thank a lot's for your help and advice :)
Case Evolv X
9900k @5Ghz - 1.284V adapt.

EK-Velocity D-RGB - Nickel + Plexi
EK-XRES 140 Revo D5 RGB PWM
EK-DuraClear 11,1/15,9mm
EK-ACF Fitting 12/16mm - Black Nickel
XSPC EX420 (front) + 3x B14-PS
Black Ice Nemesis GTS 280mm X-Flow (Top) + 2 Phantek Fan (140 that came with the Evolv X, wasn't able to fit my planned B14-PS on the top rad)
Phobya G1/4" Inline Temperature Sensor,
EK-AF Ball Valve - Black Nickel

The GPU will be put in the loop when I will get a RTX 3080ti ;)

Sorry for the bad pict quality

after leak test
jlFEKYA.jpg


With some light :)
2kAHWip.jpg


Temp testing time ;) with fan curve on Water temp (what should be the max water temp ?)
 
Soldato
Joined
28 Dec 2017
Posts
8,386
Location
Beds
Well, water temp will be lower than component temp. I'd be concerned if anything under water was pushing 60+.

Most pumps are rated for water temperatures up to 60° so certainly you need to stay below that!
 
Associate
OP
Joined
23 Feb 2019
Posts
7
Just a follow up with the complete loop:
NCxPC8S

NCxPC8S.jpg
with the light on ;)

0Tm8gFV.jpg
 
Back
Top Bottom