• Notice regarding image hosts and attachments. See here.

New build problems

Soldato
Joined
14 Dec 2004
Posts
4,451
Location
South
Hi all,

Ok, this is on a build for my mate I did.

System is:

Intel Core i7 920 D0 Stepping (SLBEJ) 2.66Ghz - o/c to 4.00GHz
Gigabyte EX58-UD5 Intel X58 Motherboard
Patriot Viper 6GB DDR3 PC3-12800C8 1600MHz DDR3
Corsair 850Watts
G.Skill 128gig falcon SSD
Vista 64
ATi 4870 x2

Try and be as brief as possible.

Chucked it all together fine, booted up, installed windows and all good.
Loaded all the chipset drivers etc... on from the mobo CD and then rebooted and it said that there was no operating system. Went to the reinstall page and it said that the drive had 119gig free of 119gig total. So in effect nothing is on the disc?!?!? odd.
BIOS running IDE, not ACHI.

Anyway, I installed things one at a time, reboot inbetween and everything seemed good.

The other day the system just hangs, tried to recover off the disc, but it was not having any of it.

So I reinstall from fresh. This time though, under ACHI as I have read things about this. All worked fine. Then installed ARMA 2, rebooted and DONG, no operating system. 119gig of 119gig available. WEIRD I hear you say?!?!

So, tried another SATA port, same thing. Another lead, same thing.

BIOS is F7, which is the latest update.

Running out of ideas, so I put it in my computer as a second boot disc.

Installed windows, drivers, games, everything. Installing two things at once trying to mess it up and its fine in mine.


So the main question is, whats wrong with his!?!?!? Im stuck now, its beyond me. I cant think of anything more to try, other than another SATA port and cable.

HELP!:(
 
Is this your first build or have you done it successfully before? I have never seen this problem before. Assuming it was a hard drive failure you would not be able to reinstall. A faulty lead would not clear data on a drive. I reckon you start again, and do things one by one without installing ARMA 2. If things are stable and working as usual then things are fine. Let me know how things get on.
 
Its my 5th build and they have all been sucessful, bar this one.

This is about the 10th time I have reinstalled and had the same issue. With windows and all the drivers, I have managed to get them on every time now, one at a time and a reboot after each one.

But when you start to use the computer normally, it messes up, installing games/patches and all those things.

And like this time, my mate had all his games installed. Switched it on one day to use it and its gone.

Think I might run a MEMTEST, perhaps the ram is dodgy. But I thought OCUK would check all that on their bundles before selling them?
 
so you've installed windows with stock bios settings? or with overclcoked settings? did you do quick format of ssd or full format? if you did full format then that is what is likely is casuing your issues


zia
 
Okay so let me get this right. You install everything and it runs fine. Then you start installing the gaming software and you cannot boot into the operating system?

If this is the case, have a look at the contents of the drive with your mates machine. If the contents are normal then your master boot record is being corrupted.

A RAM issue would normally not clear the master boot record. This is a hard drive issue.
 
Almost right, but installing any software can do it.

First time I installed windows was fine. Then I put the motherboard CD in, and clicked 'INSTALL ALL' as recommended.

Then it all died.

Doing things one at a time I foudn out, then it worked. But then other things, such as games messed it up.

Its just totally random when it goes, but obviously is a right pain in the butt as you never know when its going to die.

Ill install windows on his storage disc and see what that does.

The SSD is still working perfectly in my PC.
 
So if your machine is stable with the SSD then you must have had a faulty drive. If it is under warranty get it replaced.
 
never install from the CD the drivers are outdated, get chipset drivers from intel, get mobo drivers if there is any needed directly from gigabyte and then download gfx drivers from ATI.

Always a rule of thumb to learn, the stuff on cd's = outdated.
 
So if your machine is stable with the SSD then you must have had a faulty drive. If it is under warranty get it replaced.

If the SSD doesnt work in one computer, but works fine in another computer, how is the drive faulty? I think we are confusing each other?:confused:



I will d/load all the latest updates from the net and try agian :cool:
 
d/loaded all the latest drivers from websites. Installed everything. This time on rebooting from the graphics drivers it lost windows again. Last time it did this part ok. Its totally random when it losses it.

But now instead of saying "missing operating system" is says "bootmgr missing"


So now I have chucked an old HDD in and installed everything and touch wood, it all seems ok. Which says the SSD is dodgy. But the SSD works in another computer perfectly!!?!!??!?!?!?!?!

I guess the only thing to do is send it back?
 
I've had a similar problem to this.. definitely not as bad as yours though...

here ia my story..
I install everything fine inc drivers.. but when I start transferring stuff to the 1TB HDD (samsung spinpoint), the 1TB HDD appparently, doesn't exist anymore.. Its as if it was unplugged.. error saying cannot find path on my 1TB drive.. tried one of my mates perfectly working 1TB HDD, which was the exact same model that I had on mine.. and I got the same error.. I updated the BIOS of my mobo.. still no luck, so I came to a conclusion that it just wasn't compatible with my mobo, so I just traded my 1TB HDD with my bros (free upgrade for him.)
 
Back
Top Bottom