Hi,
After doing a lot of research, I intend to order the following components for a new system, to be used for mid-level gaming and CAD work:
Coolermaster Silencio 550 Case with bundled GX550 PSU
AMD Phenom II X4 960T CPU
ASUS M5A78L-M/USB3 Motherboard
Crucial Ballistix Sport DDR3-1600 Memory CL10 1.5V (2 x 4GB) (BL2KIT51264BA160A)
ASUS 6770 Direct CU Graphics Card
Samsung 1TB SpinPoint F3 HDD (HD103SJ) [Sata 2; 7200rpm]
Additional 120mm silent fan (Fractal make)
DVD-RW & Wireless PCI Card
I believe that these components should work together well, however I would be grateful of any advice for adjustments, and specifically want to make sure that the memory I have chosen will work OK (noting that the CPU/motherboard appears to only support up to 1333MHz without over clocking). There is very little difference in price between the 1333MHz (CL9) and 1600MHz (CL10) - so which do you advise I get?
Will any manual settings have to be input in the BIOS to get the 1600MHz to work? I understand that the module timings are 10-10-10-28, and the vendor does list the memory as compatible with the motherboard. [Also Asus list the CPU as compatible with the motherboard].
At present I do not intend to overclock or try to unlock the additional two cores of the 960T, however it seems like this is a very viable option, and I will no doubt look to pursue this once the basic system is up and running in a stable fashion.
This is my first full system build, and I would be grateful of any advice to make sure that I am purchasing wisely now to give good overclocking/upgrade options in the future. I should point out that the budget is relatively tight, hence the low-mid range motherboard and graphics. Indeed I will probably hold off getting the graphics card for the time being as I understand that the 7000 series will be announced imminently, and is likely to cause a reduction in price of the 6000 series.
For information my budget is approximately £400 - £450.
Thanks in advance,
David
P.S. Do I also need to get an anti-static mat/wristband?
After doing a lot of research, I intend to order the following components for a new system, to be used for mid-level gaming and CAD work:
Coolermaster Silencio 550 Case with bundled GX550 PSU
AMD Phenom II X4 960T CPU
ASUS M5A78L-M/USB3 Motherboard
Crucial Ballistix Sport DDR3-1600 Memory CL10 1.5V (2 x 4GB) (BL2KIT51264BA160A)
ASUS 6770 Direct CU Graphics Card
Samsung 1TB SpinPoint F3 HDD (HD103SJ) [Sata 2; 7200rpm]
Additional 120mm silent fan (Fractal make)
DVD-RW & Wireless PCI Card
I believe that these components should work together well, however I would be grateful of any advice for adjustments, and specifically want to make sure that the memory I have chosen will work OK (noting that the CPU/motherboard appears to only support up to 1333MHz without over clocking). There is very little difference in price between the 1333MHz (CL9) and 1600MHz (CL10) - so which do you advise I get?
Will any manual settings have to be input in the BIOS to get the 1600MHz to work? I understand that the module timings are 10-10-10-28, and the vendor does list the memory as compatible with the motherboard. [Also Asus list the CPU as compatible with the motherboard].
At present I do not intend to overclock or try to unlock the additional two cores of the 960T, however it seems like this is a very viable option, and I will no doubt look to pursue this once the basic system is up and running in a stable fashion.
This is my first full system build, and I would be grateful of any advice to make sure that I am purchasing wisely now to give good overclocking/upgrade options in the future. I should point out that the budget is relatively tight, hence the low-mid range motherboard and graphics. Indeed I will probably hold off getting the graphics card for the time being as I understand that the 7000 series will be announced imminently, and is likely to cause a reduction in price of the 6000 series.
For information my budget is approximately £400 - £450.
Thanks in advance,
David
P.S. Do I also need to get an anti-static mat/wristband?
Last edited:


and was surprised to find that my 5GHz Super Pi run was one of the fastest on there.






