New Build won't post HELP!!!!!

[Angelwolf]

Edit:
Nevermind

 

[lloydcars18]

Yes tried a hdmi cable same problem. I've removed and reseated the CPU so will try that again in the morning but that's last resort tbh

 

[lloydcars18]

Update still no Hope rebuilt my Current system so Confirmed the GPU/RAM/PSU all work the Motherboard got updated to the latest bios of F11i when it got RMA'd with another Retailer so that only leaves the CPU right.

I Just checked the B550 Aorus Elite site and the F11 Bios has been removed the same as every other Gigabyte board i checked don't u think that's strange?

 

[ShivP]

B550 AORUS ELITE?
This supports BIOS flash without CPU, RAM, GPU

https://www.gigabyte.com/Motherboard/B550-AORUS-ELITE-rev-10#kf

https://download.gigabyte.com/FileList/Manual/mb_manual_b550-aorus-elite-ax_e.pdf

 

[lloydcars18]

@ShivP it's already been updated to the latest Bios of F11I although that bios has since been taken down anyway the chip is getting returned on Monday.

 

[lloydcars18]

So got the CPU back OCUK confirmed it works did a q flash plus with the F10 bios which is for 5000 support as the one Scan did, didn't work and still can't get it to post I'm losing the will the live here.

 

[ShivP]

Are you still on the original board? Certain the board is working?

 

[ShivP]

Definitely plugging display into gpu?

 

[Cadder]

This may be silly but when I had similar issues with my build I read that someone had fixed the CPU cooler too tight and when they loosened it off it would work.

It might help some of the forums experts to see a photo of your rig with the side panel off - showing everything built up when the pc is powered on.

 

[lloydcars18]

Yes the board was RMA'D and tested working il upload a picture in a second

 

[lloydcars18]

http://imgur.com/a/Na3sS75

 

[adrichardson81]

http://imgur.com/a/Na3sS75

Have you checked the serial number? There's always an outside chance they sent the wrong board back.

What was you old build? I don't suppose the cpu is socket compatible?

 

[lloydcars18]

Nope R7 1700 from current build so none compatible thinking about getting a refund 600 quid I've spent and had it a month but can't use it

 

[tonys]

Can you try another psu? Are you using the same gpu as you had in the old system?

 

[lloydcars18]

Don't have one and it boots up and stays on so its not the PSU im sending them both back for a full refund im fed up and goona get a 3800XT for my Current board wont be as good but still better than the 1700 i have at the moment.

 

[tonys]

The psu seems to be the one thing you haven't swopped out to rule it out, the cpu and motherboard have been tested and found to be working so you have a base to work from.

 

[lloydcars18]

But the PSU works Fine with my Current system why wouldn't work with the new one?

 

[tonys]

I'm not saying that it's your psu but it could be, there are some people having problems with this board, have you tried different ram? I had problems a few weeks ago with my new monitor, 1 hdmi monitor and 1 displayport set up as multiple devices in the nvidia control panel and it won't work with both on.I had to disconnect the displayport and use the hdmi monitor to get it to boot then switch on the displayport monitor and disable the hdmi. It could also be that the ram doesn't like the new cpu/motherboard combination.

 

[decto]

http://imgur.com/a/Na3sS75

Why is the GPU is a slot that is either x1 or x2 electrically. It needs to be in the x16 electrical slot next to the CPU?

Does the SSD have an OS on it?
Remove and see if you get BIOS

 

[lloydcars18]

It was just for testing and it doesn't matter what slot its in it would still post and tried with and without SSD's attached still the same outcome.