No Display

Soldato
Joined
21 Apr 2012
Posts
4,991
Location
Bristol
Off topic but didnt want to create another thread.

The next step of the process requires me to use the monitor right?
Ive plugged the monitor into the power, works. However I have connected it to motherboard via VGA socket using a VGA cable.

No pciture comes up and monitor is on standby. The monitor is:
http://www.overclockers.co.uk/showproduct.php?prodid=MO-062-AC&groupid=17&catid=949&subcat=

If I press Auto it allows me to choose DVI or D-SUB. Since its not a DVI cable im using a choose D-SUB. But it always says "no signal" and then goes into stanby.

Ive put the CD that contains drivers and onboard manual into the pc but again nothing happens on the screen.

Can anyone help me??

To answer the questions first:

Yes I plugged the aux power into the mobo, it was a 4 pin rather than an 8 pin so i assume that is normal though?

Yes the MSI OC 6850.

Now I tried the HDMI connection on the 6850 on my TV and signal comes through from the PC.

But when I use the mobo's VGA connection on either the monitor or the TV nothing comes through.

BTW monitor supports HDMI and DVI.
TV supports HDMI and VGA.
GPU supports HDMI and DVI.
And mobo does all above.

The only problem is I do not have a DVI cable yet.

Full spec is:


YOUR BASKET
1 x Intel Core i5-3570K 3.40GHz (Ivybridge) Socket LGA1155 Processor (77W) - Retail £179.99
1 x OcUK E2250SWDA 22" Widescreen LED Monitor - Black £89.99
1 x MSI HD 6850 OC 1024MB GDDR5 PCI-Express Graphics Card £83.99
1 x Gigabyte Z77-D3H Intel Z77 (Socket 1155) DDR3 Motherboard £82.99
1 x Seagate Barracuda 7200.12 500GB SATA 6Gb/s 16MB Cache - OEM (ST500DM002) £59.99
1 x Zalman Z9 Plus Tower Case with Fan Controller - Black £44.99
1 x Cooler Master Silent Pro Modular 500W '80 Plus Bronze' Power Supply £43.98
1 x Adata XPG Gaming v1.0 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit (AX3U1600GC4G9-2G) £38.99
1 x Samsung SH-S222BB/BEBE 22x DVD±RW SATA ReWriter (Black) - OEM £16.99
Total : £664.81 (includes shipping : £19.10).

 
Okay so a little bit about problem.

Its a new pc, took 6 hours to put it together so hopefully i didnt make a bad error.

When monitor or tv is connected to the onboard GFX nothing appears on the screen apart from "No Display/signal"

When connected via GPU, writing appears on screen.

Is the motherboard broken, should I re-do the cables etc etc??
 
I havent been able to run VGA from the DVI on the GPU but I can find an adapter somewhere in the house probarbly if you suggest it?

How do I try the DVI ports without a DVI cable?
 
Okay good news! I have converrted the DVI on the GPU to VGA. And it works! :)
My guess is the onboard graphics isnt working? :/

The writing that pops up says "Reboot and selcect proper boot device or insert boot media in selected boot device and press a key"

So far I have a USB mouse and keyboard plugged in.
 
I hate this PC -_-

I enter BIOS but almost immediately it is overwritten by the "Reboot and select..." -_-
 
Hmmm this is wierd.

I changed the multiplier to 38.
Changed the RAM to 16 (1600mhz)
Changed the boot order to USB.

All it says is it failed to load BIOS or the BIOS isnt working properly (something along those lines).

Confused now.
 
Ive changed it ans still nothing. Ive changed everything to boot from the USB stick first which is where my Windows 8 is located, however the board doesnt seem to recognize its existence after you close down the BIOS (with changes saved)!
 
How much Hono? :p

Ive gone into BIOS features and changed the boot options and properties god knows how many times...

Ive tried motherboard and case USB ports.
Ive even checked in the BIOS that windows 8 is on there!
No other changes made other than ones affecting USB's and booting order
 
What would anyone reccomend doing? I would like to hold off buying a proper version of Windows until I go to college and can claim student discount.
 
hehe dont worry ive got a lot of them.
The motherboard is meant to have intergrated wi-fi though. How to i activate this?
 
Back
Top Bottom