no post

roger_37

roger_37

roger_37

Associate
Joined
20 Aug 2009
Posts
693
Location
co tyrone
hi all, got a problem with my computer.
it has a long beep and wont post,
just a black screen.iv,e got the mobo
on a peice of card bord nothing plugged
except 2 512 sticks of ram,which i changed
but still beeps and no post. any help please
 
onboard graphics, changed the ram, still
continuous beeping sound and
it will not post to see the bios
what can i try?
 
Clear the CMOS!, if you have no idea about that then unplug it from the mains and take out the watch battery on the motherboard for a minute, replace and try again!
 
already tried that, got mobo sitting on
cardboard, got psu plugged in
got mono cable plugged in,
2 sticks of ram and it still
beeps and will not post.
 
try resitting your components and then make sure that all the relevent psu connectors are connected. I once had that issue when I didn't connect the connector to the motherboard properly.
 
have reseated the psu and
the gpu fan and reseated the
video card for my mono,
reset bios via by removing
battery for a few mins,
reseated ram but still
beeps and no post,
do you think its my motherboard
thats the problem?
 
Is this a new build or old build?

BIOS update needed for cpu.

New is the 4 or 8 pin for cpu power pluggd in.
 
its an old build im putting it in new case.
usin old hdd from other pc plus i hdd from another
pc. the cpu fan is 3 pin and it spins ok as does psu
but no post
 
Google the motherboard make and model to find out what BIOS it uses. From there you can cross reference the BIOS and the beeps using the website I posted earlier to ascertain the root of the problem.
 
You must log in or register to reply here.
Back
Top Bottom