O/C Help????

Rob29

Rob29

Rob29

Associate
Joined
18 Oct 2007
Posts
141
Location
Manchester
Hi guys and gals can anyone help i'm really struggling here. My comp is as sig and i'm trying to o/c but can't get any higher than 2.55Ghz.

OCHelp.jpg


Sorry if pic to big. The settings i'm using are....
CPU Voltage @ 1.3375v
255 x 10 multi
DDR2 @ 765Mhz / 800Mhz
Speedstep = OFF
Followed the guide alllec gave me but still no luck whatever combo i try. Any help would be great. Any other info needed i will gladly supply.
 
Thanks ok idiot time how do i do that? Do i have to set them manually in the bios?
If so what timings do i need? Thanks again for the help so far.
 
You can drop the divider using the BIOS, it might not be called that though - some manufacturers call it different things.

I have that exact processor, so another thing to consider would be to increase a few voltages - I'm running my CPU at 1.4V, and I've put and extra 0.2V through the FSB and the RAM (which I've also overclocked, incidentally).

To be honest, the overclocking apps that come with mobos tend to be a bit pants, so your best bet is to stick to tweaking in the BIOS.
 
Rob29 said:
Thanks ok idiot time how do i do that? Do i have to set them manually in the bios?
If so what timings do i need? Thanks again for the help so far.
Click to expand...

Set the DRAM Frequency option to its lowest setting for 1:1. You can raise it agan and tweak your timings after you've finished clocking your CPU.
 
Thanks for help guys so far here is where i'm upto.
Currently at 2.6Ghz and running Orthos. Tried for 2.7Ghz and my comp just laughs at me and says i can't o/c for toffee.

CPU @1.4v
260 x 10
DDR2 @650mhz Auto
Speedstep OFF
Pci @ 100
Ram Timings @4:5

Anyone live in Manchester that can come and sort this out for me???
FREE beer or a brew. :D
 
You must log in or register to reply here.
Back
Top Bottom