***** OcUK 3D MARK 06 TOP-LIST (V4.0) *****

[sulli]

new score submited should be back at top of dual core single card, wahey

 

[marc2003]

updated.

 

[perox]

Submitted my X2 score yesterday, I've been trying to push it further but overclocking seems to reduce my score than anything else...

 

[ArcAneTSGK]

Usually it's CPU speed that can affect your score greatly when your SM scores stay the same or start falling. So try for 4ghz out of that CPU of yours. People have got q6600 to over 4ghz before as long as you got good cooling and dont do monster clocks, you should be ok.

 

[V|per]

Top sli (2 cards ) mark, my cpu (or should i say motherboard) is defiantely holding me back (i know it does 4ghz stable in an ip35, can't get it past 3.6ghz stable in this 680i), should be able to get at least another 1k out of that with a bit more on the old cpu.

 

[ArcAneTSGK]

Nice score v|per. i get no where near that, but i dont have no where near your spec

 

[setter]

Top sli (2 cards ) mark, my cpu (or should i say motherboard) is defiantely holding me back (i know it does 4ghz stable in an ip35, can't get it past 3.6ghz stable in this 680i), should be able to get at least another 1k out of that with a bit more on the old cpu.

nice score viper, what 680i board are you using if you dont mind me asking

 

[carrot1401]

Did a run with new 3870, and didn't upload results straight away but saved it. How do I now go about finding out my score for it

 

[marc2003]

whilst 3dmark is open, right click anywhere on the window to open your .3dr file (i think )

 

[Hesky82]

Pretty close marc right click on the saved 3dr file and open with winrar (winzip may work, not tried it) then extract the result.xml file. Use the find tool (F3) and search for the word 3DMarks, on the same script line you will see your score.
looks like this....

http://img179.imageshack.us/my.php?image=newtq8.jpg

 

[carrot1401]

Finally managed to get over 12k, without having to do any voltage changes

e8400 @ 3.6ghz (400x9)
GeCube 3870xt @ 864/1224
4gb PC6400 Ram

http://service.futuremark.com/resultComparison.action?compareResultId=5121761&compareResultType=14

Next up is aiming for the top 100

 

[perox]

How do I delete one of my scores with this new ORB?

Can't see where to do it anywhere...?

 

[GregI]

Q6600 @ 3555Mhz
HIS ICEQ3 3870 862/1338
2GB OCZ 6400
XP PRO

http://service.futuremark.com/results/showSingleResult.action?resultId=5092955&resultType=14

13,554

 

[V|per]

nice score viper, what 680i board are you using if you dont mind me asking

BFG Rev. D00

Awaiting either skulltrail or a decent nvidia chipset, as it appears the 780i's perform pretty much identically to the 680i's

It's purely the raw power of a quad core that wont allow it to clock, i had an e6400 stable at 4ghz on this exact board, 500fsb stable is pretty much godlike for a 680i board..

Even if i lower the multiplier, i can't get it stable at a higher fsb, the may be an fsb hole however, as i did manage 450x8 prime stable for about 6 hours before it gave up, that was with a voltage increase though. requires 1.416v (in windows) for 9x400, required 1.46 (again, in windows) for 8x450, and that wasn't stable after the 6th hour had passed, so a little more needed i think. Decided with 400x9 because the temperature difference was something like 71°c to 59°c.

 

[setter]

BFG Rev. D00

Awaiting either skulltrail or a decent nvidia chipset, as it appears the 780i's perform pretty much identically to the 680i's

It's purely the raw power of a quad core that wont allow it to clock, i had an e6400 stable at 4ghz on this exact board, 500fsb stable is pretty much godlike for a 680i board..

Even if i lower the multiplier, i can't get it stable at a higher fsb, the may be an fsb hole however, as i did manage 450x8 prime stable for about 6 hours before it gave up, that was with a voltage increase though. requires 1.416v (in windows) for 9x400, required 1.46 (again, in windows) for 8x450, and that wasn't stable after the 6th hour had passed, so a little more needed i think. Decided with 400x9 because the temperature difference was something like 71°c to 59°c.

my e6600 requires 1.525 vcore in bios to be stable (8 hours + orthos) 1.472 in windows, drops a slight at load, cant remember exactly, but with my card @795/1095/2000 i hit 14627 in 06, thought about maybe getting an aftermarket cooler for the card, or if funds allow buy a second one, temps on the cpu hit at highest 58'c

 

[marc2003]

updated.

had bit of a shock last night when i logged into my webspace and the database had gone. i was just about to log a ticket with support but luckily it came back. i'm now going to take regular backups.

 

[555BUK]

Here's my ATI card for the Dual Core / Single Card Top20.

e8400 @ 3.9ghz (433x9)
GeCube 3850Pro 512mb @ 905/1000
4gb PC5300 Ram

12849

beats all of the single card 3870XT's and most of the 8800GT's posted so far.

 

[marc2003]

Here's my ATI card for the Dual Core / Single Card Top20.

e8400 @ 3.9ghz (433x9)
GeCube 3850Pro 512mb @ 905/1000
4gb PC5300 Ram

12849

beats all of the single card 3870XT's and most of the 8800GT's posted so far.

i don't see your score on the recent submissions. go and read the first post again.

 

[555BUK]

i don't see your score on the recent submissions. go and read the first post again.

My eagerness got the better of me again. Now submitted and currently #96th overall and the fatsted single ATI card on a Dual Core (#19th). 12849 l bet that doesn't last for long.

Damn some of those NVidiot owners are hard to catch.

 

[mattyrigby00]

9677

might overclock abit further and try to go for 10k, could just install xp but not worth it just for this =P

edit: lmfao, i accidently put 128mb as the memory. re submitting