-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
***** OcUK 3D MARK 06 TOP-LIST (V4.0) *****
- Thread starter marc2003
- Start date
- Status
Caporegime
Associate
How exactly do i get the compare link from orb ?
Im trying to enter my score and i paste in the url i get from orb but the form rejects it .
http://service.futuremark.com/resultComparison.action?compareResultId=5870218&compareResultType=14
Im trying to enter my score and i paste in the url i get from orb but the form rejects it .
http://service.futuremark.com/resultComparison.action?compareResultId=5870218&compareResultType=14
Soldato
Upload, then publish it with your registered online account at futuremark. Once thats done it can be actively compared to others and you get the link needed.
Associate
Got it ,, thanks
It was there in the little itty bitty box ,, hehe
It was there in the little itty bitty box ,, hehe
Last edited:
It took me a while to figure that one out! lol.
You dont copy the webpages URL from the top on the webpage, I cant remember exacty what do do but its somthing along these lines:
you have to go to my results, view single results, details, then scroll down a little bit and there is a box labled compare URL or somthing like that. It is this URL that you need to copy.
Just updated mine as I found an old Q6600 knocking about.
Seems to clock a lot better than my old E6600 got it upto 3600mhz with relative ease. Ran a couple of tests and managed to eclipse previous score by nearly 2000 points
Latest result http://service.futuremark.com/compare?3dm06=6138441
Seems to clock a lot better than my old E6600 got it upto 3600mhz with relative ease. Ran a couple of tests and managed to eclipse previous score by nearly 2000 points
Latest result http://service.futuremark.com/compare?3dm06=6138441
Soldato
Associate
new score submitted, had to re register sorry, change of email address
this page shows your score of 11226 submitted last saturday.
http://www.marc2003.ukfsn.org/ocuk/index.php
looking back, you posted your new score in this thread sunday morning but didn't use the form.
Soldato
New score added. It's hard to compete with all these Quads . Though my 4Ghz dual is trying!
. Though my 4Ghz dual is trying!
Last edited:
Hi Marc i submited this result to you a few days ago, hope it was all in order ?
http://service.futuremark.com/compare?3dm06=6126296 19319
http://service.futuremark.com/compare?3dm06=6126296 19319
Associate
Finally modded my own bios and pencil modded my cards to get 1.45V to get my Xfire Powercolor PCS 3870 setup performing properly on my MSI P35 NE02-FR setup. Got up to 15528 so far.
The memory in Xfire config will not OC even 1Mhz with these cards so stuck at 1125. These were supposed to be the 2400Mhz mem version but I couldnt be bothered to return them. The GPU runs fine at 972Mhz with these volts. If anyone has had success with a mem OC in Xfire with these Powercolor cards could you let me know what you did. Each of the cards singly will do over 972/1251 but in Xfire any mem OC bombs out. Must be a hardware/driver/bios/xfire memory synch thingy with the Powercolor cards as other cards seem to OC mem . Pain in the pattutti as I could get a lot more perfomance out of the pair with another couple hundred Mhz outta the memory.
I used the divider fix bios as a base and set the GPU/Mem speeds and voltage defaults and the 8.2 beta Catalysts to get here. The 8.3's/hotfix caused me nuttin but problems!
Another big help was Memset. Changing the Permance Level to 7 from 8 on my Reaper 9200 HPC upped my Mem throughput from 8450MB/s to 8793MB/s running at 1200Mhz on Sandra which helped a lot also. A bit better than what Sandra says DDR3 will do.
Will need to get a faster CPU to hang with the big boyz though, my E6300 looks all lonely where it is sitting now (LOL)!
The memory in Xfire config will not OC even 1Mhz with these cards so stuck at 1125. These were supposed to be the 2400Mhz mem version but I couldnt be bothered to return them. The GPU runs fine at 972Mhz with these volts. If anyone has had success with a mem OC in Xfire with these Powercolor cards could you let me know what you did. Each of the cards singly will do over 972/1251 but in Xfire any mem OC bombs out. Must be a hardware/driver/bios/xfire memory synch thingy with the Powercolor cards as other cards seem to OC mem . Pain in the pattutti as I could get a lot more perfomance out of the pair with another couple hundred Mhz outta the memory.
I used the divider fix bios as a base and set the GPU/Mem speeds and voltage defaults and the 8.2 beta Catalysts to get here. The 8.3's/hotfix caused me nuttin but problems!
Another big help was Memset. Changing the Permance Level to 7 from 8 on my Reaper 9200 HPC upped my Mem throughput from 8450MB/s to 8793MB/s running at 1200Mhz on Sandra which helped a lot also. A bit better than what Sandra says DDR3 will do.
Will need to get a faster CPU to hang with the big boyz though, my E6300 looks all lonely where it is sitting now (LOL)!
Last edited:
- Status