-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
**Official 3D Mark 11 scores**
- Thread starter Gregster
- Start date
Soldato
- Joined
- 27 Feb 2012
- Posts
- 6,586
Very nice clocks on that 7970.
Puts my Sapphire to shame
Basically the same as yours, very early (1st week) model.
Associate
- Joined
- 2 Mar 2009
- Posts
- 405
SCORE
P11388 3DMarks
GRAPHICS SCORE
11628
PHYSICS SCORE
11986
COMBINED SCORE
9263
http://valid.canardpc.com/2605165
http://www.3dmark.com/3dm11/5133187
Slightly better score.
This is with the new nvidia 310.70 driver released today.
EDIT
SCORE
P11662 3DMarks
GRAPHICS SCORE
11981
PHYSICS SCORE
11861
COMBINED SCORE
9524
http://www.3dmark.com/3dm11/5133664
Im not sure if it was the new driver or the update to 3d mark, but i can push this card a lot harder now. Still hasn't crashed yet so i can get more out of it.
P11388 3DMarks
GRAPHICS SCORE
11628
PHYSICS SCORE
11986
COMBINED SCORE
9263
http://valid.canardpc.com/2605165
http://www.3dmark.com/3dm11/5133187
Slightly better score.
This is with the new nvidia 310.70 driver released today.
EDIT
SCORE
P11662 3DMarks
GRAPHICS SCORE
11981
PHYSICS SCORE
11861
COMBINED SCORE
9524
http://www.3dmark.com/3dm11/5133664
Im not sure if it was the new driver or the update to 3d mark, but i can push this card a lot harder now. Still hasn't crashed yet so i can get more out of it.
Last edited:
The best driver for a single GPU I have found is 306.23, having said that this was on X79 it may be different with your system.
Nice score
Gregster will pleased
Thanks bud!
Good on yours bud! the cold help's a lot, Ive could have gone higher I was using the Artmoney to push voltage higher! however when I push to 1.51 on the voltage for gpu, pc shut down I dont think it was due to temps as the temps was 45c at max!
Good on yours bud! the cold help's a lot, Ive could have gone higher I was using the Artmoney to push voltage higher! however when I push to 1.51 on the voltage for gpu, pc shut down I dont think it was due to temps as the temps was 45c at max!
Last edited:
Perhaps at the limit for chilled water?
I wish mine weren't locked to 1.35v
I know that feeling dude
If you stick to the normal bios you may actually find once maxed it will push 1.362v, its strictly a soft limit. Its entirely possible something like artmoney would open up doors on the 7970 LTG too, but interest seems to have dropped. vBios modding seems the only realistic option, but even steps to that has pretty much come to a dead end.Very nice score Sub and gratz on 2nd spot. 8Pack winning with LN2 cooling
As for the shutting down, that would probably be because of the volts at 1.5+. What drivers did you use for this run?
@whyscotty, did you get the X79/CF/Eyefinity sorted?
As for the shutting down, that would probably be because of the volts at 1.5+. What drivers did you use for this run?
@whyscotty, did you get the X79/CF/Eyefinity sorted?
Very nice score Sub and gratz on 2nd spot. 8Pack winning with LN2 cooling
As for the shutting down, that would probably be because of the volts at 1.5+. What drivers did you use for this run?
@WhyScotty, did you get the X79/CF/Eyefinity sorted?
Testing with one card at the mo,
so far so good
All reports from various forums indicate its sorted so looking good.
Tempted for 2 MSI ref with blocks as i think I have the bug
Soldato
- Joined
- 9 Mar 2009
- Posts
- 2,877
- Location
- -
Finally got my lightnings under water. Had a few mishaps.
I thought I'd bricked the first card because it wasn't sending anything to the monitor. Reseated block and all fine o_0.
The second block I noticed was further away from the pcb to the left of the terminal (which is what i thought may be causing the failing first card) took that apart and discover it's like that because the pre-installed stand-off isn't screwed in fully to the block >.>. No wonder heaven was jerky on that card! 2 of the memory chips weren't making contact with the block!
Anyway, all good now. But my rad takes about a week to slowly bleed rofl. I'll look at running a bench when I'm up and running properly but I won't be using artmoney I think.
I thought I'd bricked the first card because it wasn't sending anything to the monitor. Reseated block and all fine o_0.
The second block I noticed was further away from the pcb to the left of the terminal (which is what i thought may be causing the failing first card) took that apart and discover it's like that because the pre-installed stand-off isn't screwed in fully to the block >.>. No wonder heaven was jerky on that card! 2 of the memory chips weren't making contact with the block!
Anyway, all good now. But my rad takes about a week to slowly bleed rofl. I'll look at running a bench when I'm up and running properly but I won't be using artmoney I think.