-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
**Official 3D Mark 11 scores**
- Thread starter Gregster
- Start date
Associate
I'll give that a try tonight, on 8.98.0.0 so 8.981.2.0 might yield me some better results
Yeah can't hurt,i only install the drivers now i don't use CCC as i use afterburner and i don't touch any other settings in CCC.
Regards
OcUK Staff
Beat your GPU score with my little 670, just the fact I cant afford that £400 CPU
My actual bench scores I posted earlier this is a mess about no tuning or anything!!!
Nice scores 8 Pack and welcome back to top
1385mhz on the core and 1900mhz on the memory is impressive for out the box I am so impressed with the 670. I can't beat that GFX score and I have a good clocker. Lucky punk
Scores updated guys and thanks for posting. Also, great to see we have our first 7850.
OcUK Staff
Nice scores 8 Pack and welcome back to top
That card does 1500mhz on Cascade phase and its looking like I will do this bench before the end of the week now.
Soldato
Did you buy a new CPU to run this benchmark? You already had an Ivy i5 according to your signature
I am so impressed with the 670. I can't beat that GFX score and I have a good clocker. Lucky punk
Lucky indeed, I just flashed the BIOS to that one in another thread here and with a little help from a external house fan maybe, I reckon I could get through the benchmark at 1400mhz now lol
Did you buy a new CPU to run this benchmark? You already had an Ivy i5 according to your signature
I had a mate that was willing to pay top dollar for it if I installed and clocked it to 4.5ghz for him, so the upgrade basically cost me nothing.
Got myself a nice Vertex 4 256gb as well, cloning as we speak
Soldato
- Joined
- 27 Feb 2012
- Posts
- 6,586
I need 1.38v for it to pass 3D11 @4.9Ghz.
1.29v @4.7Ghz
1.33v @4.8Ghz
1.38v @4.9Ghz
Can't get it to pass with 5.0Ghz but i've only tried up to 1.42v. Don't wish to go any higher due to temps. Mines custom WC and they're insane with anymore than 1.4v.
Soldato
As you live nearby let me borrow your chip for a run
(joking)Which part of Peterborough do you reside in?
Soldato
- Joined
- 27 Feb 2012
- Posts
- 6,586
As you live nearby let me borrow your chip for a run
Which part of Peterborough do you reside in?
Outside of P'boro. March - 20ish miles.
Made more sense putting location as "Peterborough" rather than some little known town lol
Soldato
Might do another run with my 2700K @ 5GHz as i know it can but im not sure about my HX 520 PSU being up to the job with the 7950 OC'd too. Current score is stock auto volts on the card (1105/1625). Anybody know if im gona be ok with the Corsair PSU i have? I got 3x 1TB Samsung F3's and a Samsung 830 in there with 5x 120mm fans and a soundcard and CD/DVD Drive.
Do i have enough juice to up my volts on the 7950?
Do i have enough juice to up my volts on the 7950?
Soldato
I would imagine it's going to closeish to the limit but there's no real way to be sure unless you can read how many watts it's actually pulling from the wall and then compare that to the number of amps supplied on the 12V multiplied by 12.
OcUK Staff
3D11 stable
Soldato
- Joined
- 27 Feb 2012
- Posts
- 6,586
Worst that's going to happen is it will crash, might as well give it a go.
You're getting close to the edge though, 5Ghz is probably pulling? 200w? (hard to say without voltages) The 7950 isn't pulling much more than stock, considering it's stock voltages.
OcUK Staff
On the 2700K tune your PLL so you dont need more volts to pass 3D mark. This often means a lower PLL than stock.
You can also slacken the memory slightly if necessary to get you through as memory is less important than raw mhz.
You can also slacken the memory slightly if necessary to get you through as memory is less important than raw mhz.
Soldato
I couldn't have an nvidia card breaking up that nice run of red at the top. 
3930k @ 4.7 & 7970 @ 1330mhz @ 1.3v
http://3dmark.com/3dm11/4066362
3930k @ 4.7 & 7970 @ 1330mhz @ 1.3v
http://3dmark.com/3dm11/4066362
Soldato
Ok will give it a go sometime soon. My pll volts is set to 1.8 i think.. i got some settings advice for overclocking my mobo on here somewhere
My 2700K @ 5GHz volts are 1.42v
http://valid.canardpc.com/show_oc.php?id=2311225
Will be using Sapphire Trixx for clocking the card.
Lets see how long it takes to crash myself
Cheers guys.
My 2700K @ 5GHz volts are 1.42v
http://valid.canardpc.com/show_oc.php?id=2311225
Will be using Sapphire Trixx for clocking the card.
Lets see how long it takes to crash myself
Cheers guys.
Soldato
had another crack at crossfire.
3930k @ 4.7 & 7970 crossfire @ 1270mhz
http://3dmark.com/3dm11/4066475
3930k @ 4.7 & 7970 crossfire @ 1270mhz
http://3dmark.com/3dm11/4066475