• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

**Official 3D Mark 11 scores**

Windows 8.1 for benching. Come on man!!! 7 64 bit for 11. Default driver run!!! changing quality etc has adverse effect. Most efficient and RAM timings effect Physics score nicely!!!

CT is often PSU actually , only test all cards and CPU working full tilt. I doubt this in your case with Seasonic. Use ROG connect to clock down your CPU for CT to make sure you pass or have a profile on AB and clock down your cards a touch. CT is only 10% of overall score anyway.
 
Last edited:
8 Pack said:
Windows 8.1 for benching. Come on man!!! 7 64 bit for 11. Default driver run!!! changing quality etc has adverse effect. Most efficient and RAM timings effect Physics score nicely!!!

CT is often PSU actually , only test all cards and CPU working full tilt. I doubt this in your case with Seasonic. Use ROG connect to clock down your CPU for CT to make sure you pass or have a profile on AB and clock down your cards a touch. CT is only 10% of overall score anyway.
Click to expand...

K man thanks, will see what i can do tomoz

This is where i could do with the oc key gizmo, presuming you can adjust on the fly?
 
Have three or four win 7 images on one drive just switch between. One gets corrupt go again on another image.

Install ROG Connect on your laptop. Install ROG connect Plus on OS you wish to control. Put white usb cable that comes with motherboard from laptop to ROG connect port on the motherboard. Run software on latop and press ROG connect button on motherboard.All voltages and multi's, BLK etc controlled on the fly from laptop. You need MEI installed also.
 
Boomstick777 said:
^^
Score 23335

Wow ! On a single Ti, that is some score lol.
Click to expand...

Yeah I only had a few litres of LN2 left after yesterdays Vantage WR so pleased with that. Will test higher clocks over the weekend and full clock on CPU also. I usually run GT's at 6275 and Physics at 6150. Here I just ran the lot at 6125 and missed out on WR by less than 80pts. Bad mistake. But I honestly never thought I would get that far in testing with limited LN2.

Maybe 1850/ 2100 will be possible next run and more LN2 provisions. With ti you have to slowly build up clocks and volts. You cant just go 1800 run it just does not happen like that same as Titan.
 
Nope. Vantage dual channel better score. Maybe get more CPU mhz then also. Mem frequency helps a tad. I was testing like C10 2850 or around that then score was more efficient but PCI X becomes high and some cards dont like. My Classy for example.
 
Last edited:
Be careful with voltage spikes at 1400+ man. Ti does not use much power according to Nvidia. 1200w PSU for one card at 1.45 - 1.5. Same volts on 290X the same PSU can run 3 cards plus!!! hmmmmmm ;)
 
8 Pack said:
Be careful with voltage spikes at 1400+ man. Ti does not use much power according to Nvidia. 1200w PSU for one card at 1.45 - 1.5. Same volts on 290X the same PSU can run 3 cards plus!!! hmmmmmm ;)
Click to expand...

Aye, will do, just having a play with vantage at mo, up by 300pts so far.

I know it cant be good but what does it mean when running bench and you get a hard shutdown?? Everything looks fine then just powers off??
 
OCP on cards!!! or PSU!! I just warned you man!!!! Yes it will be struggling. Nvidia low power consumption!! NO and NEVER!! You overclock you need silly power. For 1800 on my card I needed 1500 Super Flower on one card!!!
 
You must log in or register to reply here.
Back
Top Bottom